Skip to content
Merged
Changes from all commits
Commits
File filter

Filter by extension

Filter by extension

Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
17 changes: 10 additions & 7 deletions KNOWN-ISSUES.md
Original file line number Diff line number Diff line change
Expand Up @@ -19,13 +19,14 @@ limitations under the License.

## engine#823 — Bosgame BeyondMax board: the USB ports need the xHCI keep-awake rule

**Status: MITIGATED in 1bit OS — the ports work; the fix is a udev rule, not a driver.** On this board (AXB35-02)
every external port **works** once the xHCI controllers are kept out of D3cold. The owner's plug test on **BIOS 1.10**
(2026-11-14 22:09–22:23 ADT) exercised each one:
**Status: MITIGATED — the ports work; the fix is a udev rule, not a driver. Verified on a host with the rule, not yet on
a 1bit OS boot.** On this board (AXB35-02) every external port **works** once the xHCI controllers are kept out of
D3cold. The owner's plug test on **BIOS 1.10** (2026-11-14 22:09–22:23 ADT, on the Ubuntu host with the rule installed
in `/etc/udev/rules.d`) exercised each one:

```
front Type-C c7:00.3 5 Gbps rear Type-C c7:00.4 5 Gbps
rear USB-A c5:00.4 5 Gbps rear USB-A c7:00.0 port 4, USB 2 (a USB 2 port)
rear USB-A c5:00.4 5 Gbps rear USB-A c7:00.0 port 4, high-speed with a USB 2 stick (USB 3 not yet tried)
```

**Cause: D3cold autosuspend.** A port whose controller has been allowed to suspend does not come back on this board's
Expand All @@ -38,12 +39,14 @@ a UCSI device are both **true**, and neither is the cause. The board indeed expo
but that does not stop the ports working — the failure was power management, not a missing port description. The
`ec_su_axb35` refcount-0 observation is likewise true and likewise not the mechanism.

**Not established:** **USB4 / Thunderbolt devices are untested** through these ports. The keep-awake rule covers the
**Not established:** a **1bit OS boot** with the rule loaded from the image has not been plug-tested yet, and
**USB4 / Thunderbolt devices are untested** through these ports. The keep-awake rule covers the
xHCI controllers; a USB4 tunnel is a different path (the two `Strix Halo USB4 Host Router` functions) and nobody has put
a TB device on it.

**One device stays USB 2:** the **Ugreen RTL9210** enclosure enumerates at USB 2 on the rear USB-A port (`c7:00.0`
port 4). That port is USB 2, and the enclosure/cable pair is the other half of it — it is not the controller.
**One device stays USB 2:** the **Ugreen RTL9210** enclosure enumerates at USB 2 (high-speed) on **every** port,
including `c5:00.4`, where a different drive reaches 5 Gbps. So the limit is the enclosure or its cable, not the board.
Only a USB 2 stick has been tried on `c7:00.0` port 4, so whether that port carries USB 3 is not established.

**Affected:** every install on the Bosgame BeyondMax (AXB35-02) **without** the keep-awake rule. With the rule, all
four ports above behave. Other Strix Halo boards are not known to be affected.
Expand Down
Loading