Pmic hlos rpmh nord changes

.mailmap

@@ -399,6 +399,7 @@ Jens Axboe <axboe@kernel.dk> <jens.axboe@oracle.com>
 Jens Axboe <axboe@kernel.dk> <axboe@fb.com>
 Jens Axboe <axboe@kernel.dk> <axboe@meta.com>
 Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
+Jens Wiklander <jenswi@kernel.org> <jens.wiklander@linaro.org>
 Jernej Skrabec <jernej.skrabec@gmail.com> <jernej.skrabec@siol.net>
 Jesper Dangaard Brouer <hawk@kernel.org> <brouer@redhat.com>
 Jesper Dangaard Brouer <hawk@kernel.org> <hawk@comx.dk>
@@ -559,6 +560,7 @@ Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> <martyna.szapar-mu
 Mathieu Othacehe <othacehe@gnu.org> <m.othacehe@gmail.com>
 Mat Martineau <martineau@kernel.org> <mathew.j.martineau@linux.intel.com>
 Mat Martineau <martineau@kernel.org> <mathewm@codeaurora.org>
+Matt Coster <opensource@mtcoster.net> <matt.coster@imgtec.com>
 Matthew Wilcox <willy@infradead.org> <matthew.r.wilcox@intel.com>
 Matthew Wilcox <willy@infradead.org> <matthew@wil.cx>
 Matthew Wilcox <willy@infradead.org> <mawilcox@linuxonhyperv.com>
@@ -709,6 +711,10 @@ Qi Zheng <qi.zheng@linux.dev> <zhengqi.arch@bytedance.com>
 Quentin Monnet <qmo@kernel.org> <quentin.monnet@netronome.com>
 Quentin Monnet <qmo@kernel.org> <quentin@isovalent.com>
 Quentin Perret <qperret@qperret.net> <quentin.perret@arm.com>
+Radu Rendec <radu@rendec.net> <radu.rendec@ines.ro>
+Radu Rendec <radu@rendec.net> <rrendec@arista.com>
+Radu Rendec <radu@rendec.net> <radu.rendec@gmail.com>
+Radu Rendec <radu@rendec.net> <rrendec@redhat.com>
 Rae Moar <raemoar63@gmail.com> <rmoar@google.com>
 Rafael J. Wysocki <rjw@rjwysocki.net> <rjw@sisk.pl>
 Rajeev Nandan <quic_rajeevny@quicinc.com> <rajeevny@codeaurora.org>
@@ -813,6 +819,7 @@ Simon Wunderlich <sw@simonwunderlich.de> <simon.wunderlich@s2003.tu-chemnitz.de>
 Simon Wunderlich <sw@simonwunderlich.de> <simon.wunderlich@saxnet.de>
 Simon Wunderlich <sw@simonwunderlich.de> <simon@open-mesh.com>
 Simon Wunderlich <sw@simonwunderlich.de> <siwu@hrz.tu-chemnitz.de>
+SJ Park <sj@kernel.org>
 Sricharan Ramabadhran <quic_srichara@quicinc.com> <sricharan@codeaurora.org>
 Srinivas Kandagatla <srini@kernel.org> <srinivas.kandagatla@st.com>
 Srinivas Kandagatla <srini@kernel.org> <srinivas.kandagatla@linaro.org>

CREDITS

@@ -1503,6 +1503,10 @@ N: Andy Gross
 E: agross@kernel.org
 D: Qualcomm SoC subsystem and drivers
 
+N: Mark Gross
+E: markgross@kernel.org
+D: x86/mellanox platform maintenance and various x86 specific drivers
+
 N: Grant Grundler
 E: grantgrundler@gmail.com
 W: http://obmouse.sourceforge.net/
@@ -3096,6 +3100,10 @@ N: Jens Osterkamp
 E: jens@de.ibm.com
 D: Maintainer of Spidernet network driver for Cell
 
+N: Kent Overstreet
+E: kent.overstreet@linux.dev
+D: Co-authored and contributed to Memory Allocation Profiling
+
 N: Gadi Oxman
 E: gadio@netvision.net.il
 D: Original author and maintainer of IDE/ATAPI floppy/tape drivers

Documentation/ABI/testing/sysfs-bus-iio

@@ -917,7 +917,7 @@ Description:
 
 		Note the driver will assume the last p events requested are
 		to be enabled where p is how many it supports (which may vary
-		depending on the exact set requested. So if you want to be
+		depending on the exact set requested). So if you want to be
 		sure you have set what you think you have, check the contents of
 		these attributes after everything is configured. Drivers may
 		have to buffer any parameters so that they are consistent when
@@ -973,7 +973,7 @@ Description:
 
 		Note the driver will assume the last p events requested are
 		to be enabled where p is however many it supports (which may
-		vary depending on the exact set requested. So if you want to be
+		vary depending on the exact set requested). So if you want to be
 		sure you have set what you think you have, check the contents of
 		these attributes after everything is configured. Drivers may
 		have to buffer any parameters so that they are consistent when
@@ -1528,9 +1528,9 @@ Description:
 		the unused bits, so to get a clean value the bits value must be
 		used to mask the buffer output value appropriately. The storagebits
 		value also specifies the data alignment. So s48/64>>2 will be a
-		signed 48 bit integer stored in a 64 bit location aligned to a 64
-		bit boundary. To obtain the clean value, shift right 2 and apply a
-		mask to zero the top 16 bits of the result.
+		signed 48-bit integer stored in a 64-bit location aligned to a
+		64-bit boundary. To obtain the clean value, shift right 2 and apply
+		a mask to zero the top 16 bits of the result.
 		For other storage combinations this attribute will be extended
 		appropriately.
 

Documentation/ABI/testing/sysfs-bus-iio-adc-ad7192

@@ -16,7 +16,7 @@ Description:
 		In bridge applications, such as strain gauges and load cells,
 		the bridge itself consumes the majority of the current in the
 		system. To minimize the current consumption of the system,
-		the bridge can be disconnected (when it is not being used
+		the bridge can be disconnected (when it is not being used)
 		using the bridge_switch_en attribute.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltage2-voltage2_shorted_raw

Documentation/ABI/testing/sysfs-bus-iio-frequency

@@ -0,0 +1,11 @@
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency_resolution
+KernelVersion:	3.4.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Stores channel Y frequency resolution/channel spacing in Hz for PLL
+		devices. The given value directly influences the operating mode when
+		fractional-N synthesis is required, as it derives values for
+		configurable modulus parameters used in the calculation of the output
+		frequency. It is assumed that the algorithm used to compute the various
+		dividers is able to generate proper values for multiples of the channel
+		spacing.

Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4350

@@ -1,13 +1,3 @@
-What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency_resolution
-KernelVersion:	3.4.0
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Stores channel Y frequency resolution/channel spacing in Hz.
-		The value given directly influences the MODULUS used by
-		the fractional-N PLL. It is assumed that the algorithm
-		that is used to compute the various dividers, is able to
-		generate proper values for multiples of channel spacing.
-
 What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_refin_frequency
 KernelVersion:	3.4.0
 Contact:	linux-iio@vger.kernel.org

Documentation/ABI/testing/sysfs-bus-pci-drivers-xhci_hcd

@@ -22,7 +22,7 @@ Description:
 
 		Reading this attribute gives the state of the DbC. It
 		can be one of the following states: disabled, enabled,
-		initialized, connected or configured.
+		initialized, connected, configured or suspended.
 
 What:		/sys/bus/pci/drivers/xhci_hcd/.../dbc_idVendor
 Date:		March 2023

Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon

@@ -251,6 +251,13 @@ Description:	RO. Fan 2 speed in RPM.
 
 		Only supported for particular Intel Xe graphics platforms.
 
+		On DG2 the driver always shows two fan channels, because the
+		FSC_READ_NUM_FANS command does not work on some cards. OEMs
+		decide how the fans map to tach channels, so two fans can share
+		one tach line. When that happens, the second channel
+		reads 0 RPM even though the fan is spinning. This is normal, not
+		a bug.
+
 What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/fan3_input
 Date:		March 2025
 KernelVersion:	6.16

Documentation/ABI/testing/sysfs-driver-uniwill-laptop

@@ -78,3 +78,28 @@ Description:
 
 		Reading this file returns the profile names with the currently active one in
 		brackets.
+
+What:		/sys/bus/platform/devices/INOU0000:XX/ac_auto_boot
+Date:		March 2026
+KernelVersion:	7.1
+Contact:	Armin Wolf <W_Armin@gmx.de>
+Description:
+		Allows userspace applications to configure if the device should boot automatically
+		when being connected to a power source. Writing "1"/"0" into this file
+		enables/disables this functionality. Enabling both AC auto boot and USB powershare
+		at the same time is not supported.
+
+		Reading this file returns the current status of the AC auto boot functionality.
+
+What:		/sys/bus/platform/devices/INOU0000:XX/usb_powershare_high
+Date:		March 2026
+KernelVersion:	7.1
+Contact:	Armin Wolf <W_Armin@gmx.de>
+Description:
+		Allows userspace applications to configure if the device should continue to provide
+		power via the USB ports when hibernating or powered off. Might also increase the
+		power budget available to USB ports on some devices. Writing "1"/"0" into this
+		file enables/disables this functionality. Enabling both USB powershare and AC auto
+		boot at the same time is not supported.
+
+		Reading this file returns the current status of the USB powershare functionality.

Documentation/ABI/testing/sysfs-firmware-gsmi

@@ -19,7 +19,7 @@ Description:
 		/sys/firmware/gsmi/vars:
 
 			This directory has the same layout (and
-			underlying implementation as /sys/firmware/efi/vars.
+			underlying implementation) as /sys/firmware/efi/vars.
 			See `Documentation/ABI/*/sysfs-firmware-efi-vars`
 			for more information on how to interact with
 			this structure.

Documentation/ABI/testing/sysfs-firmware-sev-vulnerabilities

@@ -0,0 +1,19 @@
+What:		/sys/firmware/sev/vulnerabilities/supported_mitigations
+Date:		June 2026
+Contact:	linux-crypto@vger.kernel.org
+Description:
+		Read-only interface that reports the vector of SEV-SNP
+		firmware vulnerability mitigations supported by the firmware.
+
+What:		/sys/firmware/sev/vulnerabilities/verified_mitigations
+Date:		June 2026
+Contact:	linux-crypto@vger.kernel.org
+Description:
+		Read/write interface that reports the vector of SEV-SNP
+		firmware vulnerability mitigations already verified by the
+		firmware. Writing a vector value requests the firmware to
+		VERIFY the corresponding mitigation bit(s).
+
+		The list of supported mitigations and the meaning of each
+		vector bit are both platform- and bug-specific and are
+		published as part of the AMD Security Bulletin.