You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
{{ message }}
Repository navigation
[webOS 9.2.2/OLED55B2] regression: direct play of basic H264 no longer functional with 0.9.0, 0.10.0 nightlies #1096
Where previously launching a show, playback would start near instantly (local server). With 0.9.0 and onward, they now buffer indefinitely, and while forcing a transcode does work, if you don't do so quickly enough it does not function and you can no longer navigate back in the app. I saw no difference in behavior between 0.9.0 and 0.10.0.
Playback details (only if this is about playback)
Direct Play
Logs
plxnative-playback-0.8.0vs0.10.0.zip
The files in the root of this zip are from a 0.8.0 install which successfully plays, and those in the nightly dir are from the 0.10.0 nightly that hangs on direct play.
Before you submit
I have not pasted a Plex token or a passphrase into this issue.
Hi, and thank you for the two log sets, they were very helpful! They pin down what changed between 0.8.0 and the nightly on your set:
0.8.0 announces audio=aac,ac3,eac3,dts and plays the AAC track natively.
The nightly logs devcaps: gstcool dropped=["aac","ac3","eac3","dts"], so the planner has the server convert the audio to Opus. The Opus Load then has no channel count (no Opus layout for 0 channel(s); refusing the Load), and that is where the playback stops.
So there are two things to fix, and I have a draft pull request for both: #1133. It only drops a codec because of /etc/gst/gstcool.conf when that file explicitly switches the codec's own hardware decoder off (never AAC, AC3 and E-AC3), and it gives a server-converted Opus stream a channel count. I could not try it on a webOS 9 set, so it would be great if you could test it once there is a build.
Two things I cannot see from the logs (both read-only, names and numbers only):
Could you post the output of sed -n '/^\[rank\]/,/^\[sw_video_decoder\]/p' /etc/gst/gstcool.conf and of ls /usr/lib/gstreamer-1.0 | grep -i -E 'lgaudiodec|omx|rtk'? The first one tells us what exactly made the nightly drop AAC; the second which decoder plugins your set has.
The problem you describe for 0.9.0 is not in the zip (the root files are 0.8.0, the nightly folder is 0.10.0), and neither the gstcool check nor Opus exists in 0.9.0, so it may be a different problem. If you can, please attach the events log of one affected play on 0.9.0 (blank out server names), the audio tracks of that file (audio codec and channels), and say whether the player showed a spinner or a black screen, and whether BACK worked afterwards. In the nightly log BACK worked after about 8 seconds.
Thanks for the logs. The nightly problem is explained and has a draft fix in #1133. The 0.9.0 problem is not in the logs you attached, and 0.9.0 plays fine on other webOS 9 sets, so it may depend on this file. Two questions: (1) Both plays in your logs resume at 203 s. When 0.9.0 buffers forever, is it always a resume, or does the same episode also hang when started from the beginning? (2) What are that episode's audio tracks (codec and channels)?
Another set with the same failure, in case it helps #1133: an LG 32LQ63006LA on webOS TV Lite 7.6.0 (k8ap). Both builds stop the same way: 0.10.0-nightly-20261108 (1d96fbb) and the debug build of #1245, which has main 3ae2ebf merged in.
devcaps: table audio rows: MPEG/2,AAC/6,WMA/6,PCM/2,LPCM/2,AC3/6,EAC3/8,DTH/2,DTS/6,DTSH/6,DTSE/6,DRA/8,Vorbis/6,RA6/6,AMR/2,FLAC/2,OPUS/6
devcaps: gstcool dropped=["aac", "ac3", "eac3", "dts"] kept-unlisted=["opus"]
route: account prefers audio it — a track in it exists but is not direct-playable; asking the server to convert it
decision output: v=h264 a=opus
start_bufferfeed: no Opus layout for 0 channel(s); refusing the Load
That was an H.264 1080p film with an Italian AC3 5.1 track, on a remote connection, with the quality set to Original. Release 0.9.0 plays on this set.
The set's /etc/gst/gstcool.conf is the first shape the PR describes. It has no *_audiodec line at all, only software decoders at rank 0:
@RiggiG@PilaScat, #1133 has merged and is scheduled for the November 10 nightly. Once it appears in Homebrew Channel, could you update PlxNative Nightly and retry the same H.264 title at Original quality with the same audio track?
@RiggiG, please try resuming the same episode. @PilaScat, please retry the 1080p title with the Italian AC3 5.1 track. Let us know whether playback starts and whether the player shows Direct Play or Converted. If it still buffers, please share the nightly version and a fresh playback log from that attempt, after reviewing it for private details.
Retried on the 32LQ63006LA (webOS TV Lite 7.6.0) with PlxNative Nightly 0.10.0-nightly-20261109, under the same conditions as before:
the same film: 4K HEVC listed first, then a 1080p HEVC copy, both with Italian AC3 5.1;
Original quality;
Resume from the film's page;
a remote connection.
It starts, as Direct Play of the 1080p copy:
devcaps: gstcool dropped=["dts"] kept-unlisted=["opus"]
route: the first version cannot play directly; playing version 20052 (mediaIndex 1) instead
route: account prefers audio it — playing that track
decision: part=directplay video= general=None mde=Some(1000) -> DIRECT PLAY
load: v=H265 a="AC3" fps=23.976 dv=present:0 P0/0 el:0 atmos:0 max=1920x1080@60
smp_cb type=17 num=0 str={…"resourceList":[{"type":"VDEC","portNumber":2},{"type":"ADEC","portNumber":1}]}
timeline playing t=1035s/10464s
The picture kept moving for the whole run, about two minutes. The set was muted for the test, so for sound I can only show the pipeline: AC3 frames were fed throughout.
On the server, the decision was media 20052, part 37332, direct play. All five part requests went to that part, none to the 4K one, and there was no transcode. Tautulli has the session as 1080p, 2535 kbps, AC3, with direct play for video and audio.
I couldn't read the player's own label. I drive the set over SSH, and those key presses didn't reach the Info pill, so I don't have the Direct Play or Converted readout from the screen. The film's page still says "Server conversion" under the title, which is the detail-page follow-up from #1245.
@RiggiG, the cause your logs showed is fixed in 0.10.0 by #1133. The nightly was dropping AAC, AC3 and E-AC3, and the converted Opus stream then failed to load. A second TV that stopped the same way (a 32LQ63006LA on webOS TV Lite 7.6.0) now direct-plays on a build with the fix.
I'm closing this as fixed. If 0.10.0 still buffers on your B2, please comment here with a fresh event log from that attempt and I'll reopen it.
This is an automated reply: Claude Code, an AI assistant, wrote it on the maintainer's behalf.
Activity
Refs plxnative#1096: drop the repeated parenthetical in the devcaps t…
Bardioc1977 commentedon Oct 31, 2026
Hi, and thank you for the two log sets, they were very helpful! They pin down what changed between 0.8.0 and the nightly on your set:
audio=aac,ac3,eac3,dtsand plays the AAC track natively.devcaps: gstcool dropped=["aac","ac3","eac3","dts"], so the planner has the server convert the audio to Opus. The Opus Load then has no channel count (no Opus layout for 0 channel(s); refusing the Load), and that is where the playback stops.So there are two things to fix, and I have a draft pull request for both: #1133. It only drops a codec because of
/etc/gst/gstcool.confwhen that file explicitly switches the codec's own hardware decoder off (never AAC, AC3 and E-AC3), and it gives a server-converted Opus stream a channel count. I could not try it on a webOS 9 set, so it would be great if you could test it once there is a build.Two things I cannot see from the logs (both read-only, names and numbers only):
sed -n '/^\[rank\]/,/^\[sw_video_decoder\]/p' /etc/gst/gstcool.confand ofls /usr/lib/gstreamer-1.0 | grep -i -E 'lgaudiodec|omx|rtk'? The first one tells us what exactly made the nightly drop AAC; the second which decoder plugins your set has.nightlyfolder is 0.10.0), and neither the gstcool check nor Opus exists in 0.9.0, so it may be a different problem. If you can, please attach the events log of one affected play on 0.9.0 (blank out server names), the audio tracks of that file (audio codec and channels), and say whether the player showed a spinner or a black screen, and whether BACK worked afterwards. In the nightly log BACK worked after about 8 seconds.Thanks again!
GLinnik21 commentedon Nov 1, 2026
Thanks for the logs. The nightly problem is explained and has a draft fix in #1133. The 0.9.0 problem is not in the logs you attached, and 0.9.0 plays fine on other webOS 9 sets, so it may depend on this file. Two questions: (1) Both plays in your logs resume at 203 s. When 0.9.0 buffers forever, is it always a resume, or does the same episode also hang when started from the beginning? (2) What are that episode's audio tracks (codec and channels)?
PilaScat commentedon Nov 8, 2026
Another set with the same failure, in case it helps #1133: an LG 32LQ63006LA on webOS TV Lite 7.6.0 (k8ap). Both builds stop the same way:
0.10.0-nightly-20261108(1d96fbb) and the debug build of #1245, which has main 3ae2ebf merged in.That was an H.264 1080p film with an Italian AC3 5.1 track, on a remote connection, with the quality set to Original. Release 0.9.0 plays on this set.
The set's
/etc/gst/gstcool.confis the first shape the PR describes. It has no*_audiodecline at all, only software decoders at rank 0:@Bardioc1977, once #1133 is rebased I can install its CI build on this set and report back.
Preserve baseline audio codecs and size converted Opus on webOS (#1133)
GLinnik21 commentedon Nov 8, 2026
@RiggiG @PilaScat, #1133 has merged and is scheduled for the November 10 nightly. Once it appears in Homebrew Channel, could you update PlxNative Nightly and retry the same H.264 title at Original quality with the same audio track?
@RiggiG, please try resuming the same episode. @PilaScat, please retry the 1080p title with the Italian AC3 5.1 track. Let us know whether playback starts and whether the player shows Direct Play or Converted. If it still buffers, please share the nightly version and a fresh playback log from that attempt, after reviewing it for private details.
Thanks for helping verify this on both sets. Nightly update instructions
PilaScat commentedon Nov 9, 2026
Retried on the 32LQ63006LA (webOS TV Lite 7.6.0) with PlxNative Nightly 0.10.0-nightly-20261109, under the same conditions as before:
It starts, as Direct Play of the 1080p copy:
The picture kept moving for the whole run, about two minutes. The set was muted for the test, so for sound I can only show the pipeline: AC3 frames were fed throughout.
On the server, the decision was media 20052, part 37332, direct play. All five part requests went to that part, none to the 4K one, and there was no transcode. Tautulli has the session as 1080p, 2535 kbps, AC3, with direct play for video and audio.
I couldn't read the player's own label. I drive the set over SSH, and those key presses didn't reach the Info pill, so I don't have the Direct Play or Converted readout from the screen. The film's page still says "Server conversion" under the title, which is the detail-page follow-up from #1245.
GLinnik21 commentedon Nov 13, 2026
@RiggiG, the cause your logs showed is fixed in 0.10.0 by #1133. The nightly was dropping AAC, AC3 and E-AC3, and the converted Opus stream then failed to load. A second TV that stopped the same way (a 32LQ63006LA on webOS TV Lite 7.6.0) now direct-plays on a build with the fix.
I'm closing this as fixed. If 0.10.0 still buffers on your B2, please comment here with a fresh event log from that attempt and I'll reopen it.
This is an automated reply: Claude Code, an AI assistant, wrote it on the maintainer's behalf.