(An independent project, not affiliated with or endorsed by Ten-Tec. Ten-Tec model numbers: Orion = 565, Orion II = 566, Omni VII = 588.)
This is the standalone Windows edition. It has its own repository, its own releases and its own version numbers, and it is developed independently of the Linux console. Nothing here tracks or depends on that project.
A Flex/SmartSDR-style console for the Ten-Tec Orion (565/566) on Windows
10/11: full computer control, a live wideband panadapter/waterfall fed by
an SDRplay RSP, drag-the-filter-edges tuning, a draggable notch, CW decode
and a multi-channel CW skimmer, DX-cluster/RBN/POTA spots painted on the
spectrum, whole-band overview landings on the band buttons, an SWR sweep
plotted right on the pan, a real-VOACAP propagation overlay, a built-in
logbook with online log uploads, a contest deck, an RTTY modem, WinKeyer
keying, rotor control, and rigctld emulation so WSJT-X, fldigi, N1MM and
GridTracker keep working unchanged: one serial port, no flrig.
Status: ALPHA, Orion-only. Daily-driven at one station; you are among the first others to run it. Expect rough edges, report everything. The Omni VII personality exists in the code but is currently untested.
Two builds are published on the Releases page: the September 2026 build, which stays, and the latest build. Neither is "the default". Each is listed with the date it was built; pick the one you want. A newer build replaces the previous latest one.
| Build | Version | Built | What it is |
|---|---|---|---|
| September 2026 | v0.1.8-alpha |
2026-09-04 | The first complete Windows console. Smaller, simpler, and the longest-flown build on Windows. |
| November 2026 (latest) | v0.2.3-2026.11.12 |
2026-11-12 | Everything added since September: SDR receive audio (WDSP noise blankers and noise reduction), FreeDV RADE digital voice, Copy Assist (speech to text), the contest deck with practice mode, the RTTY modem, the CW deck, logbook editing, the tuner box, the GPU panadapter, keyboard PTT. Also Ham Radio Deluxe Logbook sync (both directions), an ADIF import that no longer duplicates phone contacts, LoTW confirmations that fill in after an import, working radio and wattmeter Test buttons in Station setup, and a radio COM port that is briefly busy at startup is waited for instead of leaving the console without its radio. |
From v0.2.0 on, the version number carries the build date
(v<version>-<yyyy>.<mm>.<dd>).
Both builds use the same settings and the same logbook, so you can go back and forth between them on one PC.
Windows may warn "Windows protected your PC" when you first run the program, because it is not code-signed. Click More info, then Run anyway.
- Install the SDRplay API first. Download the Windows API/hardware driver from sdrplay.com/api and run its installer. It is proprietary, so it is never bundled here; the console finds your install by itself. Skip this step and the console runs radio-only with a dark panadapter.
- Download the
tentec-console-...-win64.zipyou want from Releases. - Right-click the zip and choose Extract All, then run
tentec-console.exein the extracted folder. Do not run it from inside the zip: the files beside the exe are needed. If Windows reports a missing runtime DLL, runvc_redist.x64.exefrom the same folder once. - The Station setup dialog opens on first run. Settings live per-user
in the registry (
HKCU\Software\n8mus\tentec-console).
Hardware
- Ten-Tec Orion 565 or Orion II 566 (developed against V3 firmware) with a serial CAT connection: native RS-232 or a quality USB-serial adapter (FTDI advised).
- SDRplay RSP (developed on an RSP2; nearby models likely work) fed from the Orion's spare RX antenna jack or an antenna tap. The SDR feed MUST be TX-protected. If your tap does not isolate the SDR when you transmit, 100 W will destroy it. Know your isolation before you key up.
- A monitor at least 1920 px wide.
- Optional, each unlocking a feature: WinKeyer USB (CW keying, memories,
type-ahead), a USB audio codec / SignaLink carrying the radio's RX
audio (CW decode through the radio's own filters, RTTY, the voice keyer,
FreeDV), a Hy-Gain DCU-3 rotor or any
rotctldrotor, and a TelePost LP-100A or Array Solutions PowerMaster wattmeter.
Software
- Windows 10 or 11, 64-bit.
- The SDRplay API v3.x (above). Its
sdrplay_apiServicemust be running; the installer sets that up. - Everything else is in the zip: Qt, the VOACAP engine and, in the November build, FFTW (receive audio) and whisper.cpp with its English speech model (Copy Assist).
docs/windows-build.md is the from-scratch recipe
for a Windows build box: Visual Studio 2022 Build Tools, Qt 6.8, and the
libraries the optional features need. Release zips are cut on the station's
own Windows PC with packaging/make-windows-release.ps1, never by CI.
The Station setup dialog opens by itself: your callsign and grid, the radio model and its COM port, WinKeyer port, radio-audio devices, DX-cluster login, rotor, wattmeter. The Test buttons probe the real hardware: the radio test shows the Orion's firmware string, the keyer test runs the WinKeyer handshake. It lives in SDR ▾ → Station setup… afterwards. Radio model/port changes take effect on the next launch. Nothing is preconfigured: an empty field means that feature is off.
Then:
- rigctld emulation is on TCP 4532. Point WSJT-X / N1MM / GridTracker there (any rigctld-compatible client works). One master per radio: close any other program holding the radio's COM port first.
- The console's own spot feed is a DX-cluster telnet server on port 7300
(
127.0.0.1:7300) for a logger's band map. - The panadapter's gain is managed by Auto LNA (SDR ▾ menu). A loud evening band stepping the attenuation up is normal operation, not a fault.
- Click to tune (CW zap snaps to the carrier), wheel to step, drag a
passband edge to cut the filter, drag the passband body to slide PBT,
right-click to park VFO B,
Zzero-beats,Xflips CW sideband.
If HRD Logbook is installed, the console keeps its own logbook and HRD's in step:
- Into HRD: every contact you log in the console (LOG window, CW deck,
FT8/FT4 through WSJT-X, contest pushes) is sent to HRD Logbook as you log
it. Turn this on in Logbook → Online logs… → HRD Logbook (address
127.0.0.1, port7826). HRD Logbook must be open to receive. A contact logged while HRD is closed doesn't reach it; nothing is queued. - Catching HRD up: the Logbook window's → HRD button compares the two logs, shows how many contacts HRD is missing, and asks before sending. HRD takes these one at a time (about ten a minute). For hundreds, use Export ADIF in the console and HRD's own File → Import → ADIF.
- From HRD: contacts that land in HRD first (typed there, or from another program) are read into the console's logbook automatically every couple of minutes, whether HRD is open or not. The console reads HRD's log file and does not write to it, except as in the next point.
- Edits: correcting a contact in the console's Logbook corrects HRD's entry in place, rather than adding a second one. The entry is found by call, band and time. If HRD holds more than one match, it's left for you to fix in HRD.
HRD's log file is found at its default place,
%APPDATA%\HRDLLC\HRD Logbook\HRD My Logbook.mdb. The Microsoft Access
database driver HRD installs is what reads it.
When the console is started from its icon it writes a session log to
%LOCALAPPDATA%\n8mus\tentec-console\console.log (the previous session is
kept as console.log.1). Attach it. Say which build (the version and build
date), what band, what mode, what you clicked, and whether the radio, the
SDR, or both were connected. Screenshots welcome.
- US band plan assumptions (60 m channels, CW skimmer windows, band-plan shading).
- Orion-only until the Omni VII path is tested again.
- One console instance at a time (exclusive serial port, single-tuner SDR).
- The Linux build's cqrlog and Not1MM links don't apply on Windows; HRD Logbook takes cqrlog's place (above).
- Winlink through Pat + ARDOP needs
ardopcf.exeinstalled separately and has not been flown on Windows yet. - Copy Assist wants a CPU with AVX2 to keep up in real time.
- Keyboard PTT: the Pause key (MOX on/off) and Space in the phone contest deck work. Holding Right Ctrl to talk does not work on Windows yet.
GPL-3.0 for the combined work: the CW decode engine is a port of
fldigi's (© W1HKJ & contributors, GPL-3), which lifts the rest of this
GPL-2.0-or-later codebase to GPL-3 in combination. You received this
software with its complete source; if you pass binaries along, the source
goes with them. Which files sit under which license is in
NOTICE, and the licenses of everything bundled in the zip are in
its licenses folder. The SDRplay API is proprietary and is not part of
this distribution: every user installs it themselves from SDRplay.
73, and all signals depart at exactly Warp 1.