Skip to content

About

Solo “lottery” Bitcoin miner for the M5StickC Plus2 and other ESP32 boards (M5Stack, T‑Display, CYD, S2/S3/C3), with experimental Bitaxe Gamma 601 and NerdNOS ASIC support. Stratum V1 and V2, hardware SHA‑256 (~1 MH/s), signed auto‑updates, web installer and dashboard, ntfy/webhook alerts, Home Assistant MQTT, Prometheus metrics.

Topics

Resources

Code of conduct

Contributing

Security policy

Accessibility

Stars

3 stars

Watchers

0 watching

Forks

BDLMiner V2

Install BDLMinerV2 Stable v2.6.1

Install in your browser (Chrome / Edge) · Stable v2.6.1 release · Installation guide

Solo SHA-256d mining firmware for ESP32 boards and experimental ASIC boards, with a local dashboard and a Linux/Raspberry Pi fleet hub.

Flasher · Website · Interactive demos · Statistics · Stable v2.6.1

Mine BTC, BCH, BSV, eCash (XEC), DigiByte SHA-256d (DGB) or Peercoin (PPC, PoW) with a matching pool and payout address or account. BTC supports Stratum V1 and native Stratum V2. All other profiles use Stratum V1. Match the primary and backup pools to the selected chain. DGB requires a SHA-256d endpoint, and PPC supports proof-of-work mining only. Coin and pool setup.

BDLMiner V2 local dashboard with mining statistics and hashrate, temperature and power charts

Dashboard preview with demo data.

On-device screen previews (demo data)
Mining Clock
Mining screen Clock screen
Bitcoin network Hashrate history
Bitcoin network screen Hashrate chart

BDLMinerV2 vs NerdMiner

Both projects make solo Bitcoin mining approachable on small ESP32 devices. Choose based on the features and hardware you need, not an unverified hashrate comparison.

BDLMinerV2 NerdMiner
Main use ESP32 solo mining with local dashboard, fleet tools and additional coin profiles ESP32 educational Bitcoin lottery mining
Installation Browser flasher and board-specific firmware Follow the installation instructions for your NerdMiner version
Monitoring Local web dashboard, optional fleet hub, MQTT and Prometheus Depends on the NerdMiner firmware/version
Protocols BTC Stratum V1 and native Stratum V2; other supported coins via V1 Check the protocol support of the specific NerdMiner release
Hardware Multiple ESP32/M5Stack boards; experimental Gamma 601 and NerdNOS Supported ESP32 boards depend on NerdMiner version
Hashrate Board-dependent; only published physical measurements should be compared No directly comparable measurement established here

No performance winner is claimed. Results depend on board, clock, firmware, pool settings and measurement method. See BDLMiner hardware validation. Neither project makes ESP32 Bitcoin solo mining a reliable source of income.

Features

  • Live dashboard, charts, settings, backups, pool diagnostics and multi-miner hub.
  • Eight physical screens, English/French, themes, rotation and night mode.
  • Signed stable/beta updates with trial boot and automatic rollback.
  • Notifications, Home Assistant/MQTT, JSON API and Prometheus metrics.
  • Optional, read-only remote monitoring, off by default and independent of public statistics. Miners report under their payout address about every five minutes over verified HTTPS, with seven days of history and no local hub; a private key remains available.
  • Outbound HTTPS verifies the server certificate chain and hostname. Signed GitHub updates have a limited transport exception. See Security.

Install and update

Recommended: Install BDLMinerV2 stable v2.6.1 with the Web Flasher. Do not use older v1.x releases for a new V2 installation.

  1. Open the Flasher in Chrome or Edge on a computer. Connect your board with a data USB cable and select Flash. First installation erases the board. Read the ASIC board guide first.
  2. Join BDLMinerV2-XXXX, password MineYourCoins, then open http://192.168.4.1. Set Wi-Fi, cryptocurrency, matching pool and payout address or pool account.
  3. Open the local dashboard at the IP shown on the screen/serial monitor, or http://bdlminer-xxxx.local/.

Already installed? Use automatic signed updates or upload the matching <board>-firmware.bin from the local dashboard. Installation and update guide.

Supported boards

Family Boards
M5Stack ESP32 M5StickC Plus2, StickC/Plus, Core/Core2, Tough, Atom, Stamp Pico
M5Stack ESP32-S3 Cardputer/ADV, StickS3, CoreS3, AtomS3, Dial, DinMeter, StampS3
LilyGO T-Display, T-Display-S3
Other ESP32 Cheap Yellow Display; headless ESP32, S2, S3 and C3
ASIC — experimental Bitaxe Gamma 601 (BM1370), NerdNOS (BM1397)

Full board/environment list · Measured comparison · Hardware validation and limits

Physically measured with BDLMinerV2: M5StickC Plus2 and Bitaxe Gamma 601 (owner-operated tests). Physical V2 measurements for S2/S3/C3 and NerdNOS, and tests on the BSV/XEC/DGB/PPC pools, remain pending. Hashrate depends on the board; 1 MH/s is not a rating for every ESP32. Solo mining is educational: a payout requires finding a valid block.

Documentation

Pools for ESP32

For BTC, start with a low-difficulty pool. Endpoints, protocols and user agents. For other coins, follow the coin-specific requirements.

Privacy

Anonymous usage count

Enabled by default; disable Anonymous usage count in Network settings. What is counted.

Anonymous hashrate sharing

Hashrate and public pool-group sharing are enabled by default; both can be disabled in Network settings, and saved disabled choices are kept. Reports include board, version and coin, but no payout address, worker, private hostname or miner identifier. Data, controls and retention.

Community and license

Discord · Report a bug · Support BDLMiner

Free software under the GNU GPL v3.0. Credits and upstream projects.

About

Solo “lottery” Bitcoin miner for the M5StickC Plus2 and other ESP32 boards (M5Stack, T‑Display, CYD, S2/S3/C3), with experimental Bitaxe Gamma 601 and NerdNOS ASIC support. Stratum V1 and V2, hardware SHA‑256 (~1 MH/s), signed auto‑updates, web installer and dashboard, ntfy/webhook alerts, Home Assistant MQTT, Prometheus metrics.

Topics

Resources

Code of conduct

Contributing

Security policy

Accessibility

Stars

3 stars

Watchers

0 watching

Forks

Releases

Packages

Contributors

Languages