Issues

• Bug: a ground pour split by tracks leaves an island with no via, and nothing ties it back

  absmach/synth#279 · Filter by author JeffMboya opened on Oct 23, 2026

• Bug: a same-net via lands in a ground pad on a process that cannot fill it, and the package is refused

  absmach/synth#278 · Filter by author JeffMboya opened on Oct 23, 2026

• Bug: a routed board is not byte-reproducible, because the track list is emitted in a different order each run

  absmach/synth#277 · Filter by author JeffMboya opened on Oct 23, 2026

• Bug: the decoupling-density rule counts one connector's paralleled VBUS contacts as six loads

  absmach/synth#276 · Filter by author JeffMboya opened on Oct 23, 2026

• Bug: six parts declare a 5 V 100 mA envelope that is not the device's, and nothing checks it

  absmach/synth#275 · Filter by author JeffMboya opened on Oct 23, 2026

• Bug: the junction-temperature warning reports a part's rated maximum, not what the board dissipates

  absmach/synth#274 · Filter by author JeffMboya opened on Oct 23, 2026

• Bug: a circular courtyard reads as no courtyard, so mounting holes and test points land on other parts

  absmach/synth#273 · Filter by author JeffMboya opened on Oct 23, 2026

• Add the APDS-9301 ambient light sensor the irrigation controller needs

  absmach/synth#265 · Filter by author JeffMboya opened on Oct 22, 2026

• Add the Class A negative board that must fail with actionable diagnostics

  absmach/synth#264 · Filter by author JeffMboya opened on Oct 22, 2026

• Add the irrigation controller as the Class A integration board

  absmach/synth#263 · Filter by author JeffMboya opened on Oct 22, 2026

• Add the protected power-entry board to the Class A qualification set

  absmach/synth#262 · Filter by author JeffMboya opened on Oct 22, 2026

• Add the I2C sensor-node board to the Class A qualification set

  absmach/synth#261 · Filter by author JeffMboya opened on Oct 22, 2026

• Add the RP2350 SWD debug-target board to the Class A qualification set

  absmach/synth#260 · Filter by author JeffMboya opened on Oct 22, 2026
  1

• Bound synth check child output to prevent unbounded memory use

  absmach/synth#249 · Filter by author SammyOina opened on Oct 21, 2026
  

• Bug: a board's declared revision reaches the schematic but not the exported PCB

  absmach/synth#240 · Filter by author JeffMboya opened on Oct 19, 2026

• Bug: plane fanout reads synthesized pad geometry, so no 0402 can sit on a plane net

  absmach/synth#234 · Filter by author JeffMboya opened on Oct 19, 2026

• Bug: the board outline is set by which canvas the placer happened to succeed on, not by the circuit

  absmach/synth#233 · Filter by author JeffMboya opened on Oct 19, 2026
  1

• Bug: the KiCad pin check reads pad numbers only, so a pin declared on the wrong pad passes

  absmach/synth#230 · Filter by author JeffMboya opened on Oct 19, 2026

• Bug: four registry parts disagree with the KiCad symbols and footprints they name

  absmach/synth#229 · Filter by author JeffMboya opened on Oct 19, 2026

• Bug: a routed-length budget sums a net's branches, so adding a load fails a delay budget the copper still meets

  absmach/synth#223 · Filter by author JeffMboya opened on Oct 17, 2026

• Bug: every skew and length budget is measured with Manhattan arithmetic, overstating diagonal copper by up to 41%

  absmach/synth#222 · Filter by author JeffMboya opened on Oct 17, 2026

• Bug: a hard near placement hint is silently dropped, leaving decoupling tens of millimetres from its die

  absmach/synth#221 · Filter by author JeffMboya opened on Oct 17, 2026
  3

• Bug: every net-class via violates the annular minimum the same project file states

  bug
  absmach/synth#216 · Filter by author JeffMboya opened on Oct 16, 2026

• Schematic regions: keep everything inside the box and leave room for the title

  absmach/synth#212 · Filter by author nyagamunene opened on Oct 16, 2026

• Place passives beside the pins they serve in the schematic

  absmach/synth#207 · Filter by author nyagamunene opened on Oct 15, 2026