PostMail

一个让你能够使用 POST 请求发送邮件的简易 Flask Server

English Ver. README

快速开始

0. 安装 Flask

   sudo pip install Flask

1. 在 postmail.py 开头配置必要参数

   DEFAULT_RECEIVER = ""       # 缺省的邮件接收邮箱
   DEFAULT_SENDER_NAME = ""    # 缺省的发送者姓名
   MAIL_HOST = ""              # SMTP服务器地址, 如 smtp.126.com
   MAIL_ADDRESS = ""           # 服务器登录的邮箱地址
   PASSWORD = ""               # 服务器登录的邮箱密码

2. 运行服务器，默认运行在 80 端口以及对应 url 是 '/mail'

   python run.py

3. 然后就可以用 POST 请求发邮件了！ 你甚至不需要指定收件人，因为配置里有『默认收件人』这一选项

   import requests
   
   response = requests.post('http://www.yourserver.com/mail', data={
       'subject': "PostMail!",
       'content': "This mail is sent by PostMail!"
   })

高级

• 使用安全密钥来提升安全性 修改postmail.py文件开头的秘钥选项

  SECRET_KEY = "your_key"             # 用于验证身份的key, 留空表示不启用key验证机制

  然后你的所有请求都必须包含正确的key才会被执行发送

  import requests
  
  response = requests.post('http://www.yourserver.com/mail', data={
      'key': "your_key",
      'subject': "PostMail!",
      'content': "This mail is sent by PostMail!"
  })

• HTML 邮件支持 你能使用 PostMail 来发送HTML邮件, 只需要在请求中附带 'subtype' 参数并设置为 'html'即可。这一选项默认为 'plain'

  import requests
  
  response = requests.post('http://www.yourserver.com/mail', data={
      'subtype': "html",
      'subject': "PostMail!",
      'content': "This mail is sent by PostMail!"
  })

PostMail

A simple mail server which can let you send a email only sending a POST request

Quick start

0. install Flask

   sudo pip install Flask

1. set up the configurations at the beginning of postmail.py

   DEFAULT_RECEIVER = ""       # 缺省的邮件接收邮箱
   DEFAULT_SENDER_NAME = ""    # 缺省的发送者姓名
   MAIL_HOST = ""              # SMTP服务器地址, 如 smtp.126.com
   MAIL_ADDRESS = ""           # 服务器登录的邮箱地址
   PASSWORD = ""               # 服务器登录的邮箱密码

2. run the server, the server is default running on port 80 and set on url of '/mail'.

   python run.py

3. use POST to send the mail! you don't even need to set the mail receiver!

   import requests
   
   response = requests.post('http://www.yourserver.com/mail', data={
       'subject': "PostMail!",
       'content': "This mail is sent by PostMail!"
   })

Requirement

• Flask

Advance

• Use a key to enhance security modify the string at the beginning of postmail.py

  SECRET_KEY = "your_key"             # 用于验证身份的key, 留空表示不启用key验证机制

  Then all the request must contain the valid key as parameter

  import requests
  
  response = requests.post('http://www.yourserver.com/mail', data={
      'key': "your_key",
      'subject': "PostMail!",
      'content': "This mail is sent by PostMail!"
  })

• HTML mail support you can use PostMail to send HTML mail by setting 'subtype' as 'html', which is default set to 'plain'

  import requests
  
  response = requests.post('http://www.yourserver.com/mail', data={
      'subtype': "html",
      'subject': "PostMail!",
      'content': "This mail is sent by PostMail!"
  })

License

MIT