Skip to content

AirPods Pro 3 stay silent after walking out of range and back (link stays, pause and play brings the sound back) #132

Closed as not planned

Description

@atmamont

Before you send this

  • I searched, and this isn't there yet.

Version

1.0.0-beta.9.3.27

How did you install Y2Linux?

Innioasis Updater (Updater CE)

Do Wi-Fi and Bluetooth work?

Both work

Output

Bluetooth

Headphones or speaker model

AirPods Pro 3

What do you hear, and when?

When I walk away from the player and come back, the sound stops and does not come back. The link stays connected: play, pause and skip work and the time runs on, but the AirPods are silent. The only recovery is pause, wait a few seconds, play.

Steps:

  1. Play music to AirPods Pro 3.
  2. Walk out of range until the sound drops, then come back.
  3. The sound never comes back. Pause for about 3 s, then play: the sound comes back.

Not the cause: Wi-Fi is off on the player during normal use, ear detection is off, the iPhone's Bluetooth is off, and the AirPods connect to the iPhone only "When Last Connected to This iPhone".

File type

FLAC, MP3

How often?

Every time

Since when?

For two days I have owned the player and played around with it.

Error report

Install ID 0E2C6817, sent at 20:54 CET (19:54 UTC) on 2026-11-13, while the AirPods were silent and before any pause.

Anything else

This looks like F43/F69 (#99), but caused by a radio stall instead of a pause or a skip. Walking away stalls the link without a disconnect, so the stream stays started, and the AirPods get a gap longer than their buffer. After that they stay silent, even when packets come again. Pause, wait, play brings the sound back because it suspends the stream and starts a new one.

A possible fix: after a long stall, restart the stream the same way a pause does. I have not tested this.

Activity

  1. SchulzCode commented on Nov 17, 2026

    @SchulzCode
    Owner

    Thanks for the very clear report and the analysis, which matches what I see.

    Your report shows the player side was clean while the AirPods were silent: no errors and no gaps, and the link was still up. When you walk out of range, the radio stops sending for a few seconds without disconnecting. When it can send again, the stream carries on but the AirPods stay silent, and only a new stream start (pause, then play) wakes them.

    Your fix idea (start the stream again after a long stall, as a pause does) is the right one. It needs the Bluetooth service to tell the player that a long stall happened, which it can't do yet. That touches the Bluetooth path for every pair of headphones, so I want to do it carefully and test it with AirPods out of range before it goes out. It's planned, and I'll post here when there's a build to try.

  2. atmamont commented on Nov 17, 2026

    @atmamont
    Author

    Great, I'll be waiting. Let me know if you need my help testing your builds before officially releasing them.

  3. SchulzCode commented on Nov 19, 2026

    @SchulzCode
    Owner

    Thanks again for the precise report and the offer to test. I looked into the stream restart we talked about. During such a stall Reborn's writes keep flowing (your report shows no underrun and no blocked write), so the player can't notice the stall from the music side. Doing it inside the Bluetooth service would change the stream for every pair of headphones, and I can't test it reliably, so I'm not going to risk breaking Bluetooth for everyone. Pause, wait a moment, play stays the way to wake them up. (Small note: your report shows Wi-Fi was on at the time, at -70 dBm.)

    Where we are: Y2Linux already does what a phone does: it lowers the data rate when the link struggles, keeps Bluetooth off the Wi-Fi channel, lets Wi-Fi rest while music streams, limits the catch-up after a dropout and fills gaps with silence. I've worked through every Bluetooth report again, and the player's side is clean in all of them. What's left is the hardware: the Y2 has one small radio that shares its antenna with Wi-Fi, and it just can't hold a link the way a phone can. We've reached the ceiling of what software can do here.

    Honestly, if you want music without dropouts on the Y2, I'd recommend wired headphones.

    Beta 9.3.34 adds one last thing: each stall of the Bluetooth link is now written down, so if something new ever shows up, a report will say when and how long. More in the 9.3.34 report. I'm closing this; thanks a lot for the reports and the patience.

  4. atmamont commented on Nov 20, 2026

    @atmamont
    Author

    Gotcha! Sad but true, I completely understand the reasoning. Thanks for getting back with an explanation.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Metadata

Metadata

Assignees

No one assigned

    Labels

    No labels
    No labels

    Projects

    No projects

      Milestone

      No milestone

      Relationships

      None yet

      Development

      No branches or pull requests

      Issue actions