Skip to content

Sleeping mid-USB file transfer breaks connection #117

Open

Description

@Dama624

Before you send this

  • I searched, and this isn't there yet.

Version

1.0 Beta 9.3.26

How did you install Y2Linux?

SP Flash Tool with the first-install zip from GitHub

Do Wi-Fi and Bluetooth work?

Both work

What happened, and what did you expect?

Player went to AFK sleep mid-file transfer via USB. When it went to sleep it broke the connection. Turning the screen back on didn't recover the connection; reconnecting cable did not work either.

Was only fixed by restarting the system, then keeping the display up during transfer by navigating menus.

How to make it happen

  1. Connect to PC
  2. Transfer files (in my case it was system.img for the FM Radio fix)
  3. Leave device alone - it falls asleep midway through the file transfer
  4. File transfer breaks, computer can no longer detect the player
  5. Disconnect and reconnect cable while player is awake, does not resolve the issue
  6. Full restart the player and it will be fixed.

How often?

Every time

Since when?

I don't know

Error report

8249DAC0

Anything else

No response

Activity

  1. SchulzCode commented on Nov 13, 2026

    @SchulzCode
    Owner

    Thanks for the detailed steps! I tried to reproduce this on 9.3.27 and couldn't yet: I copied a 700 MB file to Internal Storage, the stock system.img (518 MB) into the Firmware folder, and the same image to the SD card, each time letting the screen go dark mid-copy. All three copies finished, and the connection stayed up.

    While a computer is using the cable the player doesn't actually go to sleep (the sleep is refused); only the screen goes dark. So something else must break the connection in your case. Error report 8249DAC0 never reached me, probably because the player had no Wi-Fi at the time, so I have no logs from your player.

    Could you help with a few answers? Answering by number is fine:

    1. Where did you copy system.img to? [Firmware folder on Internal Storage / Firmware folder on the SD card / somewhere else]
    2. Which computer and program did the copy? [Windows Explorer / macOS (which app?) / Linux (which file manager or tool?)]
    3. After the connection broke, did the player still respond to the wheel and buttons normally? [yes / no / slow]
    4. If it happens again: before restarting, turn on Wi-Fi and send an error report (Settings → System → Error Reports → Send Report Now), then post the code here. That report would show what the USB side did.
  2. added
    needs-infoWaiting for the author's answer; comes off when they reply
    on Nov 13, 2026
  3. Dama624 commented on Nov 13, 2026

    @Dama624
    Author

    I'm still able to repro this on the latest update (1.0 Beta 9.3.30).

    1. Copying it to Internal Storage/Firmware
    2. Linux, Dolphin
    3. Player still works totally fine, but the "USB Connected" icon on the upper right disappears (while the cable is still connected) and my PC is unable to check the contents of Y2Linux Y2 (Seems to display the Internal Storage and SD Card storage devices but I can't read either of them). Reconnecting the cable does not resolve (and the USB connected icon still doesn't appear on the status bar after reconnecting).
    4. Just sent the report
  4. removed
    needs-infoWaiting for the author's answer; comes off when they reply
    on Nov 13, 2026
  5. SchulzCode commented on Nov 17, 2026

    @SchulzCode
    Owner

    Thanks for the answers and the report from 9.3.30. They showed what keeps the player invisible afterwards:

    • Your copy was well underway (about 490 MB of system.img had arrived), then it stopped.
    • At some point the USB connection was unbound inside the player while the file-transfer program kept running. Nothing set it up again, so no cable change could bring it back, only a restart. That's also why the "USB connected" icon disappeared.

    For the next update: the player notices when its USB connection has been unbound like that and sets it up again by itself, so unplugging and replugging (or just waiting a moment) brings it back without a restart.

    What I don't know yet is why it got unbound in the middle of your copy. I copied 545 MB and 2.5 GB files from Linux (KDE's file transfer, the same one Dolphin uses) into Firmware while the screen went dark, and both finished. I'll keep this open. If it happens again after the update, a report right after it would show whether it recovered by itself.

  6. SchulzCode commented on Nov 17, 2026

    @SchulzCode
    Owner

    The recovery part is out in Beta 9.3.32: if the USB connection gets undone again, the player sets it up by itself, so unplugging and plugging in again (or waiting a moment) should bring it back without a restart. I'm keeping this open until we know why it was undone during your copy. A report sent right after it happens again would help a lot.

  7. Dama624 commented on Nov 17, 2026

    @Dama624
    Author

    Updated to latest (1.0 Beta 9.3.32) and the issue still happens. Connection breaks as soon as the player's screen goes black. Sent another error report right after it happened.

    I can at least confirm that replugging the cable exposes the file mounts again.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Metadata

Metadata

Assignees

No one assigned

    Labels

    bugSomething isn't working

    Projects

    No projects

      Milestone

      No milestone

      Relationships

      None yet

      Development

      No branches or pull requests

      Issue actions