You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
{{ message }}
Repository navigation
Wi-Fi network on channel 13 not visible until router changed to channel 6 #110
My 2.4 GHz Wi-Fi network was not visible to the Y2 when the router
selected channel 13. After I changed the router to channel 6, the same
network appeared. The player was close to the router; other networks
appeared briefly, but scans were often empty.
The radio firmware was accepted and wlan0 was registered. A diagnostic
report captured before changing channels showed:
Country: 00
Wi-Fi radio present and enabled
Six scans with zero networks
Failure: ap_unavailable
I'm in Australia. Could the generic country setting be contributing?
I noticed that wifi/regulatory.c excludes channels marked NO_IR from
the scan list, but I don't know whether channel 13 had that flag on my Y2.
You found it, thanks for digging that deep. The player has no country set, so channels 12 and 13 count as "listen only" until an access point is heard there, and my driver simply skipped those channels instead of listening. So a network on 13 could never show up.
Fixed in the next update (Beta 9.3.21): every scan now also listens on channels 12 and 13. Once your router is heard there, the channel is used like any other, no setting needed.
I couldn't test this with a real router on channel 13 yet. After the update, could you move your router back to 13 and tell me if the network appears and connects? I'm leaving this open until then.
Activity
[-]Wifi Scanning not work[/-][+]Wi-Fi network on channel 13 not visible until router changed to channel 6[/+]SchulzCode commentedon Nov 10, 2026
You found it, thanks for digging that deep. The player has no country set, so channels 12 and 13 count as "listen only" until an access point is heard there, and my driver simply skipped those channels instead of listening. So a network on 13 could never show up.
Fixed in the next update (Beta 9.3.21): every scan now also listens on channels 12 and 13. Once your router is heard there, the channel is used like any other, no setting needed.
I couldn't test this with a real router on channel 13 yet. After the update, could you move your router back to 13 and tell me if the network appears and connects? I'm leaving this open until then.
wifi: a network on channel 12 or 13 is found and joined without a cou…
release: 1.0.0-beta.9.3.21 sequence 15600 (build 231: with the sleep …
docs: Beta 9.3.21 (sequence 15700): report for owners (Bluetooth on a…
bratzelk commentedon Nov 10, 2026
Hey, amazing 👏
Tested on
Beta 9.3.23and it works perfectly.Thank you!
SchulzCode commentedon Nov 10, 2026
Cool, ill close this then :)
docs: not planned: per-list Shuffle, Previous by list order, a random…