Important
🇵🇱 This program is in Polish. The window, menus and messages are in Polish only. Polish documentation: README.pl.md
Transmit and receive POCSAG pager messages (512 / 1200 / 2400 bps) through a sound card and a radio. The window has a console for typing messages and a history table of sent and received pages below it. Each day's history is also saved to a text file next to the program.
- Encoder: text, numeric and tone-only pages, function 0–3 (A–D), all three speeds, normal or inverted polarity, up to 8 queued messages sent in one transmission (one preamble), estimated air time, Polish letters converted to ASCII for pagers.
- Decoder: live from the sound card or from a file (WAV, MP3, FLAC, OGG); adaptive equalizer with decision feedback for radio audio (high-pass / de-emphasis), noise sieve against false addresses, robust against lost sound-card packets (10 ms gaps). Own transmissions heard back are marked.
- PTT: VOX, COM port DTR / RTS / both (also inverted), Icom CI-V or Yaesu CAT. PTT is always released after data and tail, on abort, on sound-card error, on timeout and when the program closes.
- Radio tuning over CAT (Icom CI-V, Yaesu
FA): frequency list, last 8 frequencies, typed MHz; the CAT port is opened only for the change, so other programs can share it. - My pager: own RIC and group RIC — received pages to them are highlighted, the taskbar blinks;
optional sender prefix
(1234567) text, sender column in the history. - Recipients book (
odbiorcy.txt) and frequency list (czestotliwosci.txt) — editable in the program or in Notepad. - History table like a spreadsheet: drag to reorder columns, copy row / text / RIC / whole table
(tab-separated, pastes into a spreadsheet), daily file
historia_POCSAG_YYYY-MM-DD.txtreloaded on start. - Test tone 3 s (preamble only, with PTT) for setting level and deviation.
- Transmit correction for the IC-7100 USB audio path (pre-emphasis and low cut compensation).
| PTT mode | What it does |
|---|---|
| None (VOX) | audio only |
| COM: DTR / RTS line | line up while transmitting; "inverted" for active-low keying |
| COM: DTR+RTS | both lines at once; "inverted" applies to both |
| Icom CAT (CI-V) | FE FE <addr> E0 1C 00 01 FD / ... 00 FD; IC-7100 = 88h |
| Yaesu CAT | TX1; / TX0; (FT-991A, FTDX10) |
Best results when transmitting through the radio's flat DATA input (9600 / DATA): the microphone input has a high-pass filter and pre-emphasis, and 512 bps contains long runs of identical bits.
Windows x64 build in Releases — a single .exe, no installation and no DLLs.
Settings are stored in %APPDATA%\koder-dekoder-pogsag.txt; the recipients book, frequency list and
daily history files are kept next to the .exe.
Rust toolchain x86_64-pc-windows-gnu; C:\msys64\mingw64\bin (MSYS2: dlltool, windres) must be in PATH:
cargo test --release --lib
cargo build --release --bins
Tests cover the encoder (code words, frames, Polish characters), encoder → decoder over a flat path and
a simulated radio path (all speeds, both polarities, 44.1 and 48 kHz), 10 ms sample loss without false
addresses, the daily file round trip and the decoder. Reports:
cargo test --release --lib raport -- --ignored --nocapture (sensitivity vs. noise, noise after
transmission, lost samples).
Examples (examples/): live loop test through a virtual cable and a com0com pair (petla.rs), CAT
frequency setting (czest.rs, czest_silnik.rs), decoding files (dekoduj.rs), decoder window timing
(czas_okna.rs).
Transmit only with an amateur radio licence, on frequencies you are allowed to use. Receiving and publishing other people's pager messages may be restricted by law in your country.
GPL-3.0 © 2026 SP9TKN. Libraries: egui / eframe, cpal, symphonia, hound, serialport, rfd.
Tools: developed with Claude Code (Anthropic) — AI assistant used for coding, testing and documentation.
