Skip to content

About

This project is part of the coursework for the Software for Embedded Systems course at Technische Universität Hamburg (TU Hamburg).

Resources

Stars

0 stars

Watchers

1 watching

Forks

Repository files navigation

🕒 24-Hour Clock with Alarm System

A real-time clock system with millisecond precision, alarm functionality, and interactive user interface using buttons and LEDs on an embedded platform.


📄 Project Overview

This project is part of the coursework for the Software for Embedded Systems course at Technische Universität Hamburg (TU Hamburg).

It implements a real-time 24-hour clock with:

  • 1-millisecond resolution
  • Alarm functionality
  • User configuration via Rotary and Joystick Buttons
  • LED indicators for seconds, alarm status, and alarm trigger

The system runs on an embedded microcontroller and uses a scheduler framework to manage timing events and user interactions.


🔧 Key Features

  • 24-hour format display (HH:MM:SS)
  • Manual time setting during initialization
  • Alarm toggle and configuration
  • LED feedback:
    • Green LED: Blinks every second
    • Yellow LED: Indicates alarm is armed
    • Red LED: Flashes at 4 Hz when alarm triggers
  • 5-second alarm duration or until any button is pressed
  • Alarm only triggers during normal operation mode

⚙️ Operation Modes

1. Uninitialized Mode (Time Setup)

Upon power-up:

  • Display shows "HH:MM" with a message prompting time setup.
  • Use Rotary Button to increment hours.
  • Press Joystick Button to proceed to minute setup.
  • Press Joystick Button again to confirm and start the clock.

2. Normal Operation Mode

  • Clock displays time in HH:MM:SS format.
  • Rotary Button: Toggles alarm state (ON/OFF)
  • Joystick Button: Enters Alarm Setting Mode

3. Alarm Setting Mode

  • Display switches to show alarm time (HH:MM)
  • Use Rotary Button to set alarm time
  • Press Joystick Button to return to normal mode

4. Alarm Triggered Mode

  • When current time matches alarm time and alarm is ON:
    • Red LED flashes at 4 Hz
    • Alarm lasts 5 seconds or until any button is pressed

🧰 Hardware Components

  • Microcontroller: (e.g., STM32, AVR, or similar)
  • Display: 16x2 LCD or OLED (I2C or parallel)
  • Buttons:
    • Rotary Encoder / Pushbutton: For incrementing values
    • Joystick Button: For navigating modes
  • LEDs:
    • Green: Second indicator
    • Yellow: Alarm enabled
    • Red: Alarm triggered

🛠️ Software Architecture

  • Scheduler Framework used to manage:
    • 1ms timer callback for timekeeping
    • Button debouncing and input handling
    • LED blinking patterns
  • Modular design with separate modules for:
    • Clock logic (clock.c/h)
    • Alarm logic (alarm.c/h)
    • User interface (ui.c/h)
    • Scheduler (scheduler.c/h)

📋 Functional Behavior Summary

Action Effect
Power On Show default HH:MM, prompt to set time
Rotate Button Increment hour/minute/alarm time based on current mode
Press Joystick Confirm hour ➔ move to minutes ➔ confirm time ➔ enter alarm setting
Rotate in Normal Mode Toggle alarm ON/OFF
Press Joystick in Normal Enter alarm setting mode
Time Match + Alarm ON Red LED blinks at 4Hz for 5 seconds or until button pressed

🎓 Course Context

This project was developed as part of the Software for Embedded Systems course at Technische Universität Hamburg (TU Hamburg). It demonstrates understanding of:

  • Real-time scheduling
  • State machine design
  • Input/output interfacing
  • Timing accuracy and synchronization
  • Modular software architecture

About

This project is part of the coursework for the Software for Embedded Systems course at Technische Universität Hamburg (TU Hamburg).

Resources

Stars

0 stars

Watchers

1 watching

Forks

Releases

Packages

Contributors

Languages