Skip to content
Merged
Changes from all commits
Commits
File filter

Filter by extension

Filter by extension

Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
2 changes: 1 addition & 1 deletion third_party/patches/amdxdna/README.md
Original file line number Diff line number Diff line change
Expand Up @@ -50,7 +50,7 @@ two-client shape (3/3 wedges on `646FFC30…`) now refuses the second client `co

| 0008 | `accel/amdxdna: a dying context must not fail the device resume` (2 files, +33/−4) | `aie2_hwctx_resume_cb()` failed the whole walk on the `-ESRCH` that `aie2_hwctx_restart()` returns for a context whose heap address is gone (a client closing while the device is runtime-suspended), and `aie2_hw_resume()` then `break`s out of the **client** loop: every context of every later client stayed destroyed with no firmware context at all, and `pm_runtime_resume_and_get()` reported failure for a resume that had in fact started the hardware, so `amdxdna_pm_resume_get()` called `pm_runtime_set_suspended()` on a started device | the c29 take's own log: `amdxdna_pm_resume_get: Resume failed: -3` then `amdxdna_drm_close: Resume failed (-3), pid 11374 restore data not reclaimed`, followed immediately by `device is already started` — the resume ran, the dying context made it report failure (engine#1051) |
| 0009 | `accel/amdxdna: keep the array awake while a context exists` (1 file, +35/−0) | a runtime suspend destroys every firmware context and the resume recreates them; on this platform a recreated context is created and host-buffer-mapped with the same messages, the same fw ctx id and the same address, `aie2_hwctx_restart()` returns 0 — and its first dispatch still never reaches the DPU (`DPU PC 0xffffffff`, `TXN OP ID 0xffffffff`, `timed out sub command 0`), after which the array wedges until a power-cycle. Take a runtime-PM usage reference for the life of each hw_context (`pm_runtime_get_noresume()` in `aie2_hwctx_init()`, released with `pm_runtime_put_autosuspend()` in `aie2_hwctx_fini()`), so the array cannot enter that state under any client; a device with no contexts still autosuspends at 5 s | the engine#1051 ladder on strixhalo 2026-11-06: **3/3 wedge** with `power/control=auto` on the shipping module, each log showing `Destroyed fw ctx 15` → suspend → `Created fw ctx 15` + host buffer → `restarted, ret 0` → wedge, while the same request into a context created after the resume succeeded and XRT's own validate passed 5/5 across resumes. This is the driver-level form of the c30 keep-awake policy, so it protects every client, not only the payload that polls GET_INFO |
| 0010 | `accel/amdxdna: a context that failed to restart stays paused` (2 files, +16/−3) | `aie2_hwctx_restart()` called `aie2_hwctx_job_unpause()` from its shared `out:` label, so a context whose restart had just **failed** was unpaused anyway, and `aie2_tdr_resume_hwctx()` logged it as restarted either way: the queue then drained onto a `fw_ctx_id` firmware no longer has, and the only visible symptom is an NPU that says it recovered and then silently stops answering (engine#1750). The unpause now happens only on success; a failed context stays paused, so its jobs get a clean, attributable failure instead of a wedge. One change fixes both callers — the TDR resume callback and `aie2_hwctx_resume_cb()` on the pm-resume path, which had the same defect; `aie2_hwctx_init()` keeps its own unpause and is untouched | **carried, NOT measured** — no TDR run yet, and the issue's own first question (does firmware reject a command on a destroyed `fw_ctx_id` cleanly?) is the run that would settle bug vs robustness smell. Verified here instead: it applies **on top of `0001`–`0009`** (`git apply --check` against the series result) and **conflicts on the bare pin**, so it must be applied in series order; and the module **compiles** against `7.4.0-rc1-1bit`'s build tree (`amdxdna.ko`, 14,033,392 B, 0 errors, `aie2_ctx.o` and `aie2_tdr.o` rebuilt), never loaded — `/lib/modules` untouched, no `modprobe`, no parameter changed |
| 0010 | `accel/amdxdna: a context that failed to restart stays paused` (2 files, +16/−3) | `aie2_hwctx_restart()` called `aie2_hwctx_job_unpause()` from its shared `out:` label, so a context whose restart had just **failed** was unpaused anyway, and `aie2_tdr_resume_hwctx()` logged it as restarted either way: the queue then drained onto a `fw_ctx_id` firmware no longer has, and the only visible symptom is an NPU that says it recovered and then silently stops answering (engine#1750). The unpause now happens only on success. **What this does NOT deliver** (engine#1855): `aie2_hwctx_fini()` still calls `aie2_hwctx_job_unpause()` unconditionally -- this patch touches one call site, not fini -- and `aie2_hwctx_job_unpause()` *runs* the parked jobs (`list_del` + `aie2_job_run`) rather than failing them, so a failed context's parked jobs are executed at teardown. That is strictly better than draining them onto a `fw_ctx_id` firmware no longer has, but it is not the clean, attributable failure this row used to claim: the residual is a context whose restart failed doing work at destroy time. Failing those jobs at fini is a second patch, not a doc change, and is not carried here. One change fixes both callers — the TDR resume callback and `aie2_hwctx_resume_cb()` on the pm-resume path, which had the same defect; `aie2_hwctx_init()` keeps its own unpause and is untouched | **carried, NOT measured** — no TDR run yet, and the issue's own first question (does firmware reject a command on a destroyed `fw_ctx_id` cleanly?) is the run that would settle bug vs robustness smell. Verified here instead: it applies **on top of `0001`–`0009`** (`git apply --check` against the series result) and **conflicts on the bare pin**, so it must be applied in series order; and the module **compiles** against `7.4.0-rc1-1bit`'s build tree (`amdxdna.ko`, 14,033,392 B, 0 errors, `aie2_ctx.o` and `aie2_tdr.o` rebuilt), never loaded — `/lib/modules` untouched, no `modprobe`, no parameter changed |
| 0011 | `accel/amdxdna: document trusted mailbox ring geometry and drop the power-of-two check` (1 file, +7/−5) — **carried, NOT installed** | `xdna_mailbox_start_channel()` refused any channel whose firmware-supplied `rb_size` was not a power of two (`-EINVAL`), which turns a ring geometry AMD's signed firmware handed us into a channel that cannot start at all. Upstream drops the check and documents that the geometry, `rb_start_addr` and `rb_size` come from signed firmware and are trusted by design | **carried, NOT measured** — no run has needed a non-power-of-two ring here, so this is a port of an upstream decision rather than a fix we have watched. Verified: the file is the upstream change unmodified, and it `git apply --check`s **both** on the bare pin (`526c6081`) and on top of `0001`–`0010`, so it is order-independent in the series. Never loaded: `/lib/modules` untouched, no `modprobe`, no parameter changed |
| 0012 | `accel/amdxdna: Reject device heap BO when dev_mem_size is not set` (1 file, +5) — **carried, NOT installed** | a heap-BO request on a device with no heap hit a `WARN_ON` and a bogus alignment test instead of one quiet refusal; upstream returns `-EOPNOTSUPP` from the allocation path. Ours warns today (`amdxdna_gem.c`), so this removes a warning from a hot path rather than changing behaviour anyone has depended on | **carried, NOT measured** — the warn path has not been hit on this box in the fleet's runs. Verified the same way: unmodified upstream change, applies on the bare pin and on `0001`–`0011`. Not loaded |

Expand Down
Loading