Use FT232H for JTAG Debugging? #226

ChocolateLoverRaj · 2024-11-01T19:22:37Z

ChocolateLoverRaj
Nov 1, 2024

I would prefer not to spend $35 for a JTAG debugger. Is it possible to use a FT232H breakout board instead, like this one?

This tutorial uses a FT232H to debug a raspberry pi, but even that tutorial uses something different than the picutre above.

BartMassey · 2024-11-04T22:54:22Z

BartMassey
Nov 4, 2024
Maintainer

Any JTAG unit that OpenOCD deals with should be able to work reasonably. You may have to modify the OpenOCD settings for yours.

5 replies

ChocolateLoverRaj Nov 4, 2024
Author

So should I just be able to copy the config from https://jacobncalvert.com/blog-archive/2020/03/05/better-jtag-on-the-cheap-with-the-ft232h/ to docker/rustembedded-osdev-utils/rpi3.cfg?

BartMassey Nov 7, 2024
Maintainer

Should work: give it a try and let us know.

ChocolateLoverRaj Nov 9, 2024
Author

I tried it and I get this error:

Open On-Chip Debugger 0.12.0
Licensed under GNU GPL v2
For bug reports, read
	http://openocd.org/doc/doxygen/bugs.html
DEPRECATED! use 'ftdi vid_pid' not 'ftdi_vid_pid'
DEPRECATED! use 'ftdi tdo_sample_edge' not 'ftdi_tdo_sample_edge'
DEPRECATED! use 'ftdi layout_init' not 'ftdi_layout_init'
DEPRECATED! use 'ftdi layout_signal' not 'ftdi_layout_signal'
DEPRECATED! use 'ftdi layout_signal' not 'ftdi_layout_signal'
Warn : Transport "jtag" was already selected
DEPRECATED! use 'adapter speed' not 'adapter_khz'
Warn : DEPRECATED! use '-baseaddr' not '-ctibase'
Warn : DEPRECATED! use '-baseaddr' not '-ctibase'
Warn : DEPRECATED! use '-baseaddr' not '-ctibase'
Warn : DEPRECATED! use '-baseaddr' not '-ctibase'
Info : Listening on port 6666 for tcl connections
Info : Listening on port 4444 for telnet connections
Info : clock speed 1000 kHz
Info : JTAG tap: rpi3.tap tap/device found: 0x4ba00477 (mfg: 0x23b (ARM Ltd), part: 0xba00, ver: 0x4)
Error: Invalid ACK (7) in DAP response

ChocolateLoverRaj Nov 9, 2024
Author

Actually when I ran it through docker I now get this:

sudo make openocd

Launching OpenOCD
Open On-Chip Debugger 0.11.0+dev-g1ad6ed3 (2021-12-02-20:10)
Licensed under GNU GPL v2
For bug reports, read
	http://openocd.org/doc/doxygen/bugs.html
DEPRECATED! use 'ftdi vid_pid' not 'ftdi_vid_pid'
DEPRECATED! use 'ftdi tdo_sample_edge' not 'ftdi_tdo_sample_edge'
DEPRECATED! use 'ftdi layout_init' not 'ftdi_layout_init'
DEPRECATED! use 'ftdi layout_signal' not 'ftdi_layout_signal'
DEPRECATED! use 'ftdi layout_signal' not 'ftdi_layout_signal'
Warn : Transport "jtag" was already selected
DEPRECATED! use 'adapter speed' not 'adapter_khz'
Warn : DEPRECATED! use '-baseaddr' not '-ctibase'
Warn : DEPRECATED! use '-baseaddr' not '-ctibase'
Warn : DEPRECATED! use '-baseaddr' not '-ctibase'
Warn : DEPRECATED! use '-baseaddr' not '-ctibase'
Info : Listening on port 6666 for tcl connections
Info : Listening on port 4444 for telnet connections
Info : clock speed 1000 kHz
Info : JTAG tap: rpi3.tap tap/device found: 0x4ba00477 (mfg: 0x23b (ARM Ltd), part: 0xba00, ver: 0x4)
Info : rpi3.core0: hardware has 6 breakpoints, 4 watchpoints
Error: JTAG-DP STICKY ERROR
Error: JTAG-DP STICKY ERROR
Error: JTAG-DP STICKY ERROR
Error: JTAG-DP STICKY ERROR
Error: JTAG-DP STICKY ERROR
Info : rpi3.core1: hardware has 6 breakpoints, 4 watchpoints
Error: JTAG-DP STICKY ERROR
Error: JTAG-DP STICKY ERROR
Error: JTAG-DP STICKY ERROR
Error: JTAG-DP STICKY ERROR
Error: JTAG-DP STICKY ERROR
Info : rpi3.core2: hardware has 6 breakpoints, 4 watchpoints
Error: JTAG-DP STICKY ERROR
Error: JTAG-DP STICKY ERROR
Error: JTAG-DP STICKY ERROR
Error: JTAG-DP STICKY ERROR
Error: JTAG-DP STICKY ERROR
Info : rpi3.core3: hardware has 6 breakpoints, 4 watchpoints
Error: JTAG-DP STICKY ERROR
Error: JTAG-DP STICKY ERROR
Error: JTAG-DP STICKY ERROR
Error: JTAG-DP STICKY ERROR
Error: JTAG-DP STICKY ERROR
Info : starting gdb server for rpi3.core0 on 3333
Info : Listening on port 3333 for gdb connections
Info : starting gdb server for rpi3.core1 on 3334
Info : Listening on port 3334 for gdb connections
Info : starting gdb server for rpi3.core2 on 3335
Info : Listening on port 3335 for gdb connections
Info : starting gdb server for rpi3.core3 on 3336
Info : Listening on port 3336 for gdb connections
Info : accepting 'gdb' connection on tcp/3333
Info : rpi3.core0 cluster 0 core 0 multi core
rpi3.core0 halted in AArch64 state due to debug-request, current mode: EL2H
cpsr: 0x600003c9 pc: 0x81ad4
MMU: disabled, D-Cache: disabled, I-Cache: disabled
Info : New GDB Connection: 1, Target rpi3.core0, state: halted
Error: Timeout waiting for aarch64_exec_opcode
Polling target rpi3.core1 failed, trying to reexamine
Info : rpi3.core1: hardware has 6 breakpoints, 4 watchpoints
Warn : Prefer GDB command "target extended-remote :3333" instead of "target remote :3333"
Error: Opcode 0x0400d533, DSCR.ERR=1, DSCR.EL=2
Error: Opcode 0xd5330400, DSCR.ERR=1, DSCR.EL=2
Error: Opcode 0xd5330400, DSCR.ERR=1, DSCR.EL=2
Error: Opcode 0xd5330400, DSCR.ERR=1, DSCR.EL=2
Error: Opcode 0xd5330400, DSCR.ERR=1, DSCR.EL=2
Error: Opcode 0xd5330400, DSCR.ERR=1, DSCR.EL=2
Error: Opcode 0xd5330400, DSCR.ERR=1, DSCR.EL=2
Error: Opcode 0xd5330400, DSCR.ERR=1, DSCR.EL=2
Error: Opcode 0xd5330400, DSCR.ERR=1, DSCR.EL=2
Error: Opcode 0xd5330400, DSCR.ERR=1, DSCR.EL=2
Error: Opcode 0xd5330400, DSCR.ERR=1, DSCR.EL=2
Error: Opcode 0xd5330400, DSCR.ERR=1, DSCR.EL=2
Error: Opcode 0xd5330400, DSCR.ERR=1, DSCR.EL=2
Error: Opcode 0xd5330400, DSCR.ERR=1, DSCR.EL=2
Error: Opcode 0xd5330400, DSCR.ERR=1, DSCR.EL=2
Error: Opcode 0xd5330400, DSCR.ERR=1, DSCR.EL=2
Error: Opcode 0xd5330400, DSCR.ERR=1, DSCR.EL=2
Error: Opcode 0xd5330400, DSCR.ERR=1, DSCR.EL=2
Error: Opcode 0xd5330400, DSCR.ERR=1, DSCR.EL=2
Error: Opcode 0xd5330400, DSCR.ERR=1, DSCR.EL=2
Error: Opcode 0xd5330400, DSCR.ERR=1, DSCR.EL=2
Error: Opcode 0xd5330400, DSCR.ERR=1, DSCR.EL=2
Error: Opcode 0xd5330400, DSCR.ERR=1, DSCR.EL=2
Error: DSCR_DTR_RX_FULL, dscr 0x43047213
Error: DSCR_DTR_RX_FULL, dscr 0x43047213
Error: DSCR_DTR_RX_FULL, dscr 0x43047213
Error: Timeout waiting for aarch64_exec_opcode
Polling target rpi3.core1 failed, trying to reexamine
Info : rpi3.core1: hardware has 6 breakpoints, 4 watchpoints
Error: DSCR_DTR_RX_FULL, dscr 0x43047213
Error: Timeout waiting for aarch64_exec_opcode
Polling target rpi3.core1 failed, trying to reexamine
Info : rpi3.core1: hardware has 6 breakpoints, 4 watchpoints
Error: DSCR_DTR_RX_FULL, dscr 0x43047213
Error: Timeout waiting for aarch64_exec_opcode
Polling target rpi3.core1 failed, trying to reexamine
Info : rpi3.core1: hardware has 6 breakpoints, 4 watchpoints
Error: DSCR_DTR_RX_FULL, dscr 0x43047213
Error: Timeout waiting for aarch64_exec_opcode
Polling target rpi3.core1 failed, trying to reexamine
Info : rpi3.core1: hardware has 6 breakpoints, 4 watchpoints
Error: DSCR_DTR_RX_FULL, dscr 0x43047213
Error: Timeout waiting for aarch64_exec_opcode
Polling target rpi3.core1 failed, trying to reexamine
Info : rpi3.core1: hardware has 6 breakpoints, 4 watchpoints
Error: DSCR_DTR_RX_FULL, dscr 0x43047213
Error: Timeout waiting for aarch64_exec_opcode
Polling target rpi3.core1 failed, trying to reexamine
Info : rpi3.core1: hardware has 6 breakpoints, 4 watchpoints

sudo make gdb

Launching GDB
Reading symbols from target/aarch64-unknown-none-softfloat/release/kernel...
(No debugging symbols found in target/aarch64-unknown-none-softfloat/release/kernel)
>>> target remote :3333
Remote debugging using :3333
0x0000000000081ad4 in core::fmt::Formatter::pad ()
─── Assembly ────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────
 0x0000000000081ad4  ? .inst    0x00000000 ; undefined
 0x0000000000081ad8  ? .inst    0x00000000 ; undefined
 0x0000000000081adc  ? .inst    0x00000000 ; undefined
 0x0000000000081ae0  ? .inst    0x00000000 ; undefined
 0x0000000000081ae4  ? .inst    0x00000000 ; undefined
 0x0000000000081ae8  ? .inst    0x00000000 ; undefined
 0x0000000000081aec  ? .inst    0x00000000 ; undefined
 0x0000000000081af0  ? .inst    0x00000000 ; undefined
 0x0000000000081af4  ? .inst    0x00000000 ; undefined
 0x0000000000081af8  ? .inst    0x00000000 ; undefined
─── Expressions ─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────
─── History ─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────
─── Memory ──────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────
─── Registers ───────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────
                 x0 0x0000000000000000                  x1 0x0000000000082686                               x2 0x0000000000000032                x3 0x0000000000080270
                 x4 0x0000000000000034                  x5 0x44e4f80800000000                               x6 0x0000000000000000                x7 0xe50be40a80200f1c
                 x8 0x00000000000827d0                  x9 0x0000000000082686                              x10 0x000000000000003f               x11 0x000000003f201000
                x12 0x0000000000000019                 x13 0x0000000000000031                              x14 0x00000000ffffff9c               x15 0x000000000007fe38
                x16 0x0000000005f5e0ff                 x17 0xfffffffffffffffc                              x18 0x0000000000000000               x19 0x0000000000000000
                x20 0x00000000000827e8                 x21 0x0000000000000000                              x22 0x0000000000000000               x23 0x00000000020821f8
                x24 0x00000000000027e8                 x25 0xb806d0011da23909                              x26 0xca2f444465c375c0               x27 0xb004001d5444dee8
                x28 0xaa9261b8b6a53890                 x29 0xdc12283083005d49                              x30 0x0000000000081acc                sp 0x000000000007ff30
                 pc 0x0000000000081ad4                cpsr [ SP=1 EL=0 nRW=0 F I A D C Z ]                fpsr 0x00000000                      fpcr 0x00000000
            ELR_EL1 0xa61250308801b097             ESR_EL1 0x8801b097                                 SPSR_EL1 0x8801b097                   ELR_EL2 0x2a42020135449138
            ESR_EL2 0x4ca77f71                    SPSR_EL2 0xfc27d067                                  ELR_EL3 0xa61250308801b097           ESR_EL3 0x8801b097
           SPSR_EL3 0x8801b097
─── Source ──────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────
─── Stack ───────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────
[0] from 0x0000000000081ad4 in core::fmt::Formatter::pad
─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────

ChocolateLoverRaj Nov 9, 2024
Author

After following this tutorial I now get this error: Error: abort occurred - dscr = 0x03047253

sudo openocd -f ./ft232h-2.cfg -f ../docker/rustembedded-osdev-utils/rpi3.cfg
Open On-Chip Debugger 0.12.0
Licensed under GNU GPL v2
For bug reports, read
	http://openocd.org/doc/doxygen/bugs.html
DEPRECATED! use 'adapter speed' not 'adapter_khz'
Warn : DEPRECATED! use '-baseaddr' not '-ctibase'
Warn : DEPRECATED! use '-baseaddr' not '-ctibase'
Warn : DEPRECATED! use '-baseaddr' not '-ctibase'
Warn : DEPRECATED! use '-baseaddr' not '-ctibase'
Info : Listening on port 6666 for tcl connections
Info : Listening on port 4444 for telnet connections
Info : clock speed 1000 kHz
Info : JTAG tap: rpi3.tap tap/device found: 0x4ba00477 (mfg: 0x23b (ARM Ltd), part: 0xba00, ver: 0x4)
Info : rpi3.core0: hardware has 6 breakpoints, 4 watchpoints
Info : rpi3.core1: hardware has 6 breakpoints, 4 watchpoints
Info : rpi3.core2: hardware has 6 breakpoints, 4 watchpoints
Info : rpi3.core3: hardware has 6 breakpoints, 4 watchpoints
Info : starting gdb server for rpi3.core0 on 3333
Info : Listening on port 3333 for gdb connections
Info : starting gdb server for rpi3.core1 on 3334
Info : Listening on port 3334 for gdb connections
Info : starting gdb server for rpi3.core2 on 3335
Info : Listening on port 3335 for gdb connections
Info : starting gdb server for rpi3.core3 on 3336
Info : Listening on port 3336 for gdb connections
Info : accepting 'gdb' connection on tcp/3333
Info : rpi3.core0 cluster 0 core 0 multi core
rpi3.core0 halted in AArch64 state due to debug-request, current mode: EL2H
cpsr: 0x600003c9 pc: 0x2080464
MMU: disabled, D-Cache: disabled, I-Cache: disabled
Info : New GDB Connection: 1, Target rpi3.core0, state: halted
Warn : Prefer GDB command "target extended-remote :3333" instead of "target remote :3333"
Error: abort occurred - dscr = 0x03047253
Error: abort occurred - dscr = 0x03047253
Error: Opcode 0xd53e4020, DSCR.ERR=1, DSCR.EL=2
Error: Failed to read ELR_EL3 register
Error: Opcode 0xd53e5200, DSCR.ERR=1, DSCR.EL=2
Error: Failed to read ESR_EL3 register
Error: Opcode 0xd53e4000, DSCR.ERR=1, DSCR.EL=2
Error: Failed to read SPSR_EL3 register
Warn : keep_alive() was not invoked in the 1000 ms timelimit. GDB alive packet not sent! (1004 ms). Workaround: increase "set remotetimeout" in GDB
Warn : keep_alive() was not invoked in the 1000 ms timelimit. GDB alive packet not sent! (1001 ms). Workaround: increase "set remotetimeout" in GDB
Warn : Haven't made progress in mpsse_flush() for 2002ms.
Warn : keep_alive() was not invoked in the 1000 ms timelimit. GDB alive packet not sent! (1001 ms). Workaround: increase "set remotetimeout" in GDB
Warn : keep_alive() was not invoked in the 1000 ms timelimit. GDB alive packet not sent! (1001 ms). Workaround: increase "set remotetimeout" in GDB
Warn : Haven't made progress in mpsse_flush() for 4004ms.
Warn : keep_alive() was not invoked in the 1000 ms timelimit. GDB alive packet not sent! (1001 ms). Workaround: increase "set remotetimeout" in GDB
Warn : keep_alive() was not invoked in the 1000 ms timelimit. GDB alive packet not sent! (1001 ms). Workaround: increase "set remotetimeout" in GDB
Warn : keep_alive() was not invoked in the 1000 ms timelimit. GDB alive packet not sent! (1001 ms). Workaround: increase "set remotetimeout" in GDB
Warn : Haven't made progress in mpsse_flush() for 8004ms.
Warn : keep_alive() was not invoked in the 1000 ms timelimit. GDB alive packet not sent! (1001 ms). Workaround: increase "set remotetimeout" in GDB
Warn : keep_alive() was not invoked in the 1000 ms timelimit. GDB alive packet not sent! (1001 ms). Workaround: increase "set remotetimeout" in GDB
Warn : keep_alive() was not invoked in the 1000 ms timelimit. GDB alive packet not sent! (1001 ms). Workaround: increase "set remotetimeout" in GDB
Warn : keep_alive() was not invoked in the 1000 ms timelimit. GDB alive packet not sent! (1001 ms). Workaround: increase "set remotetimeout" in GDB
Warn : keep_alive() was not invoked in the 1000 ms timelimit. GDB alive packet not sent! (1001 ms). Workaround: increase "set remotetimeout" in GDB
Warn : keep_alive() was not invoked in the 1000 ms timelimit. GDB alive packet not sent! (1001 ms). Workaround: increase "set remotetimeout" in GDB
Warn : Haven't made progress in mpsse_flush() for 16003ms.
Warn : keep_alive() was not invoked in the 1000 ms timelimit. GDB alive packet not sent! (1001 ms). Workaround: increase "set remotetimeout" in GDB
Warn : keep_alive() was not invoked in the 1000 ms timelimit. GDB alive packet not sent! (1001 ms). Workaround: increase "set remotetimeout" in GDB
Warn : keep_alive() was not invoked in the 1000 ms timelimit. GDB alive packet not sent! (1001 ms). Workaround: increase "set remotetimeout" in GDB
Warn : Haven't made progress in mpsse_flush() for 32001ms.
Warn : Haven't made progress in mpsse_flush() for 64001ms.

I think this is closer to working but load in GBD doesn't work.

BartMassey · 2024-11-09T22:01:12Z

BartMassey
Nov 9, 2024
Maintainer

I will try to find the hardware and software to replicate this. In the meantime, please let us know if you figure out anything.

0 replies

Navigation Menu

Uh oh!

Uh oh!

Use FT232H for JTAG Debugging? #226

Uh oh!

{{title}}

Uh oh!

Replies: 2 comments 5 replies

Uh oh!

{{title}}

Uh oh!

Uh oh!

{{title}}

Uh oh!

Uh oh!

{{title}}

Uh oh!

Uh oh!

{{title}}

Uh oh!

Uh oh!

{{title}}

Uh oh!

Uh oh!

{{title}}

Uh oh!

Uh oh!

{{title}}

Uh oh!

Select a reply

Uh oh!

Uh oh!

Uh oh!

Use FT232H for JTAG Debugging? #226

Uh oh!

ChocolateLoverRaj Nov 1, 2024

Replies: 2 comments · 5 replies

Uh oh!

BartMassey Nov 4, 2024 Maintainer

Uh oh!

ChocolateLoverRaj Nov 4, 2024 Author

Uh oh!

BartMassey Nov 7, 2024 Maintainer

Uh oh!

ChocolateLoverRaj Nov 9, 2024 Author

Uh oh!

ChocolateLoverRaj Nov 9, 2024 Author

Uh oh!

ChocolateLoverRaj Nov 9, 2024 Author

Uh oh!

BartMassey Nov 9, 2024 Maintainer

ChocolateLoverRaj
Nov 1, 2024

Replies: 2 comments 5 replies

BartMassey
Nov 4, 2024
Maintainer

ChocolateLoverRaj Nov 4, 2024
Author

BartMassey Nov 7, 2024
Maintainer

ChocolateLoverRaj Nov 9, 2024
Author

ChocolateLoverRaj Nov 9, 2024
Author

ChocolateLoverRaj Nov 9, 2024
Author

BartMassey
Nov 9, 2024
Maintainer