en/zero/zero3/hardware-design

[giscus[bot]]

en/zero/zero3/hardware-design

Introduces the hardware info of ZERO 3, such as hardware interface, support accessories and so on

https://docs.radxa.com/en/zero/zero3/hardware-design

[tejasdukare02]

I happened to damage/desolder few components near the TF card, can just get to know the values for it so i can bring up the board back

[tejasdukare02]

I have radxa Zero3W and ther PCB version is V1.12 ,
the schematics is available but there are no designaort printed on the board by which we could confirm the right component,
ther damages components are placed exactly on the right side of the TF card, near the 40 pin GPIO header
if the board is placed in a why that the TF card is on top the CSI camera connector in bottem and the 40 pin header on the right side of the board,
i am looking for the componentes places between the TF card and the Header,
2 Cap on the top
one tiny resistor placed vertical,
a transistor below them again 3 CAP placed and 2 tiny resistor near the header ,
i can provide you the image for it if i get any mail id or point of assistance over chat

[tejasdukare02]

[image: Screenshot from 2026-08-19 11-37-43.png] [image: Screenshot from 2026-08-19 11-47-50.png] HI, Thank you for the prompt reply and attending my issue, have radxa Zero3W and ther PCB version is V1.12 , the schematics is available but there are no designaort printed on the board by which we could confirm the right component, ther damages components are placed exactly on the right side of the TF card, near the 40 pin GPIO header if the board is placed in a why that the TF card is on top the CSI camera connector in bottem and the 40 pin header on the right side of the board, i am looking for the componentes places between the TF card and the Header, 2 Cap on the top one tiny resistor placed vertical, a transistor below them again 3 CAP placed and 2 tiny resistor near the header , I have attached images which will help you to identify the components Regards, Tejas Dukare Raveagle Technologies Pvt,Ltd.

…

On Wed, 19 Aug 2026 at 14:00, Tang Zaozao ***@***.***> wrote: Hi, sorry to hear about the damage. The component values around the TF (microSD) card are all published in the official schematic PDFs on the Zero 3 download page: - ZERO 3W V1.11 schematic: https://dl.radxa.com/zero3/docs/hw/3w/radxa_zero_3w_v1110_schematic.pdf - ZERO 3W V1.12 (AIC8800 version): https://dl.radxa.com/zero3/docs/hw/3w/radxa_zero_3w_v1.12_schematic.pdf - ZERO 3E V1.2 schematic: https://dl.radxa.com/zero3/docs/hw/3e/radxa_zero_3e_v1200_schematic.pdf Look for the "MicroSD Card" sheet. On ZERO 3W V1.11 (sheet 16) and ZERO 3E V1.2 (sheet 19), the parts near the TF connector are: - Series resistor on the VCC3V3_SYS feed: R90723 = 0R - Decoupling capacitor: C227 = 100nF / 10V - ESD protection arrays on SDMMC0 data/CLK/CMD lines: D13-D19 = BTR04G02 - Card detect: on 3W, Q3 = MMBT3904M with R137 = 10K and R138 = 10K (R90731 = NC); on 3E, R137 = 0R on the DET line - TF connector: 3W = TFP09-2-12B, 3E = HYCW104-TF08-375B Please confirm whether you have a ZERO 3W or 3E (and the PCB revision printed on the board), then use the matching schematic. The component placement maps in the same download section can help you identify the exact reference designators of the parts you desoldered. If you tell us which board and which component(s) were affected, we can double-check the values for you. — Reply to this email directly, view it on GitHub <#2033?email_source=notifications&email_token=B7D4G75N26G4TJKW6VKWPBD5KVQRRA5CNFSNUABIM5UWIORPF5TWS5BNNB2WEL2ENFZWG5LTONUW63SDN5WW2ZLOOQXTCOBQG43TCNZUUZZGKYLTN5XKOY3PNVWWK3TUUVSXMZLOOSWGM33PORSXEX3DNRUWG2Y#discussioncomment-18077174>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/B7D4G75PFJEOAGDLT7O23EL5KVQRRAVCNFSNUABIKJSXA33TNF2G64TZHM3TONZQHA3DCOBUHNCGS43DOVZXG2LPNY5TCMBWGQ2TAMRUUF3AE> . Triage notifications, keep track of coding agent tasks and review pull requests on the go with GitHub Mobile for iOS <https://github.com/notifications/mobile/ios/B7D4G7YKM2V5GUSNGUVJH4D5KVQRRA5CNFSNUABIM5UWIORPF5TWS5BNNB2WEL2ENFZWG5LTONUW63SDN5WW2ZLOOQXTCOBQG43TCNZUUZZGKYLTN5XKOY3PNVWWK3TUUVSXMZLOOSVGM33PORSXEX3JN5ZQ> and Android <https://github.com/notifications/mobile/android/B7D4G75KQKYTUFKJXBWQDN35KVQRRA5CNFSNUABIM5UWIORPF5TWS5BNNB2WEL2ENFZWG5LTONUW63SDN5WW2ZLOOQXTCOBQG43TCNZUUZZGKYLTN5XKOY3PNVWWK3TUUVSXMZLOOSXGM33PORSXEX3BNZSHE33JMQ>. Download it today! You are receiving this because you commented.Message ID: ***@***.***>

[RadxaMitchell]

@tejasdukare02
Hi, Sorry for the late reply. Please refer to the component placement diagram for version V1.11, as it is the same as version V1.12.
https://dl.radxa.com/zero3/docs/hw/3w/radxa_zero_3w_v1110_smb.zip

[tejasdukare02]

thank you so much team, you've saved my board and money. i am sure after connecting this components, my board will be back Regards, Tejas Dukare Raveagle Technologies Pvt,Ltd.

…

On Mon, 24 Aug 2026 at 08:38, Mitchell Ma ***@***.***> wrote: @tejasdukare02 <https://github.com/tejasdukare02> Hi, Sorry for the late reply. Please refer to the component placement diagram for version V1.11, as it is the same as version V1.12. https://dl.radxa.com/zero3/docs/hw/3w/radxa_zero_3w_v1110_smb.zip — Reply to this email directly, view it on GitHub <#2033?email_source=notifications&email_token=B7D4G76C23XPJZN4KHLD4QD5LOWRTA5CNFSNUABIM5UWIORPF5TWS5BNNB2WEL2ENFZWG5LTONUW63SDN5WW2ZLOOQXTCOBRGI4TOMZUUZZGKYLTN5XKO3LFNZ2GS33OUVSXMZLOOSWGM33PORSXEX3DNRUWG2Y#discussioncomment-18129734>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/B7D4G76HN3WJ4LEF66OY3CD5LOWRTAVCNFSNUABIKJSXA33TNF2G64TZHM3TONZQHA3DCOBUHNCGS43DOVZXG2LPNY5TCMBWGQ2TAMRUUF3AE> . Triage notifications, keep track of coding agent tasks and review pull requests on the go with GitHub Mobile for iOS <https://github.com/notifications/mobile/ios/B7D4G7YCGZSQJE7SJB3D6Z35LOWRTA5CNFSNUABIM5UWIORPF5TWS5BNNB2WEL2ENFZWG5LTONUW63SDN5WW2ZLOOQXTCOBRGI4TOMZUUZZGKYLTN5XKO3LFNZ2GS33OUVSXMZLOOSVGM33PORSXEX3JN5ZQ> and Android <https://github.com/notifications/mobile/android/B7D4G75YYAOGAOYIJAMB6KL5LOWRTA5CNFSNUABIM5UWIORPF5TWS5BNNB2WEL2ENFZWG5LTONUW63SDN5WW2ZLOOQXTCOBRGI4TOMZUUZZGKYLTN5XKO3LFNZ2GS33OUVSXMZLOOSXGM33PORSXEX3BNZSHE33JMQ>. Download it today! You are receiving this because you were mentioned.Message ID: ***@***.***>

[tejasdukare02]

[image: image.png] This is the identified part where i have damaged parts, components are - 1. Q8 - wpm2341-3/tr 2. C320 - 22f/10V 3. C19 - 22f/6.3V 4. r67 - 10k can you please confirm the packages of allabove components and also if possible confirm i have traces the right values for V1.12 board. Regards, Tejas Dukare Raveagle Technologies Pvt,Ltd. On Tue, 25 Aug 2026 at 12:55, Tejas Dukare ***@***.***> wrote:

…

thank you so much team, you've saved my board and money. i am sure after connecting this components, my board will be back Regards, Tejas Dukare Raveagle Technologies Pvt,Ltd. On Mon, 24 Aug 2026 at 08:38, Mitchell Ma ***@***.***> wrote: > @tejasdukare02 <https://github.com/tejasdukare02> > Hi, Sorry for the late reply. Please refer to the component placement > diagram for version V1.11, as it is the same as version V1.12. > https://dl.radxa.com/zero3/docs/hw/3w/radxa_zero_3w_v1110_smb.zip > > — > Reply to this email directly, view it on GitHub > <#2033?email_source=notifications&email_token=B7D4G76C23XPJZN4KHLD4QD5LOWRTA5CNFSNUABIM5UWIORPF5TWS5BNNB2WEL2ENFZWG5LTONUW63SDN5WW2ZLOOQXTCOBRGI4TOMZUUZZGKYLTN5XKO3LFNZ2GS33OUVSXMZLOOSWGM33PORSXEX3DNRUWG2Y#discussioncomment-18129734>, > or unsubscribe > <https://github.com/notifications/unsubscribe-auth/B7D4G76HN3WJ4LEF66OY3CD5LOWRTAVCNFSNUABIKJSXA33TNF2G64TZHM3TONZQHA3DCOBUHNCGS43DOVZXG2LPNY5TCMBWGQ2TAMRUUF3AE> > . > Triage notifications, keep track of coding agent tasks and review pull > requests on the go with GitHub Mobile for iOS > <https://github.com/notifications/mobile/ios/B7D4G7YCGZSQJE7SJB3D6Z35LOWRTA5CNFSNUABIM5UWIORPF5TWS5BNNB2WEL2ENFZWG5LTONUW63SDN5WW2ZLOOQXTCOBRGI4TOMZUUZZGKYLTN5XKO3LFNZ2GS33OUVSXMZLOOSVGM33PORSXEX3JN5ZQ> > and Android > <https://github.com/notifications/mobile/android/B7D4G75YYAOGAOYIJAMB6KL5LOWRTA5CNFSNUABIM5UWIORPF5TWS5BNNB2WEL2ENFZWG5LTONUW63SDN5WW2ZLOOQXTCOBRGI4TOMZUUZZGKYLTN5XKO3LFNZ2GS33OUVSXMZLOOSXGM33PORSXEX3BNZSHE33JMQ>. > Download it today! > You are receiving this because you were mentioned.Message ID: > ***@***.***> >

[tejasdukare02]

hi team, thank you for helping me with the required data, can you please help me with the component part number or its details as i am not able to understand the exact package and grade of the components i have damaged and need to order new one, [image: image.png] This is the identified part where i have damaged parts, components are - 1. Q8 - wpm2341-3/tr 2. C320 - 22f/10V 3. C19 - 22f/6.3V 4. r67 - 10k please confirm the identified parts are correct and its package and additional info on it Regards, Tejas Dukare Raveagle Technologies Pvt,Ltd. On Tue, 25 Aug 2026 at 13:26, Tejas Dukare ***@***.***> wrote:

…

[image: image.png] This is the identified part where i have damaged parts, components are - 1. Q8 - wpm2341-3/tr 2. C320 - 22f/10V 3. C19 - 22f/6.3V 4. r67 - 10k can you please confirm the packages of allabove components and also if possible confirm i have traces the right values for V1.12 board. Regards, Tejas Dukare Raveagle Technologies Pvt,Ltd. On Tue, 25 Aug 2026 at 12:55, Tejas Dukare ***@***.***> wrote: > thank you so much team, > > you've saved my board and money. > i am sure after connecting this components, my board will be back > > Regards, > Tejas Dukare > Raveagle Technologies Pvt,Ltd. > > > On Mon, 24 Aug 2026 at 08:38, Mitchell Ma ***@***.***> > wrote: > >> @tejasdukare02 <https://github.com/tejasdukare02> >> Hi, Sorry for the late reply. Please refer to the component placement >> diagram for version V1.11, as it is the same as version V1.12. >> https://dl.radxa.com/zero3/docs/hw/3w/radxa_zero_3w_v1110_smb.zip >> >> — >> Reply to this email directly, view it on GitHub >> <#2033?email_source=notifications&email_token=B7D4G76C23XPJZN4KHLD4QD5LOWRTA5CNFSNUABIM5UWIORPF5TWS5BNNB2WEL2ENFZWG5LTONUW63SDN5WW2ZLOOQXTCOBRGI4TOMZUUZZGKYLTN5XKO3LFNZ2GS33OUVSXMZLOOSWGM33PORSXEX3DNRUWG2Y#discussioncomment-18129734>, >> or unsubscribe >> <https://github.com/notifications/unsubscribe-auth/B7D4G76HN3WJ4LEF66OY3CD5LOWRTAVCNFSNUABIKJSXA33TNF2G64TZHM3TONZQHA3DCOBUHNCGS43DOVZXG2LPNY5TCMBWGQ2TAMRUUF3AE> >> . >> Triage notifications, keep track of coding agent tasks and review pull >> requests on the go with GitHub Mobile for iOS >> <https://github.com/notifications/mobile/ios/B7D4G7YCGZSQJE7SJB3D6Z35LOWRTA5CNFSNUABIM5UWIORPF5TWS5BNNB2WEL2ENFZWG5LTONUW63SDN5WW2ZLOOQXTCOBRGI4TOMZUUZZGKYLTN5XKO3LFNZ2GS33OUVSXMZLOOSVGM33PORSXEX3JN5ZQ> >> and Android >> <https://github.com/notifications/mobile/android/B7D4G75YYAOGAOYIJAMB6KL5LOWRTA5CNFSNUABIM5UWIORPF5TWS5BNNB2WEL2ENFZWG5LTONUW63SDN5WW2ZLOOQXTCOBRGI4TOMZUUZZGKYLTN5XKO3LFNZ2GS33OUVSXMZLOOSXGM33PORSXEX3BNZSHE33JMQ>. >> Download it today! >> You are receiving this because you were mentioned.Message ID: >> ***@***.***> >> >

[tzz-radxa]

Hi Tejas,

Thank you for your patience. Based on our official board records, here is the board version change record for Radxa Zero 3W (RS107). We hope this helps you cross-check the hardware documents (schematic / placement / BOM) you have against your V1.12 board.

Radxa Zero 3W (RS107) — Board Version Change Record

Component supplier / part-number details are intentionally omitted; this record lists only the recorded differences between board revisions.

V1.11 (2023-09)

• R119: value changed from 100 Ω to 22 Ω (package 0201, footprint unchanged).
• Board silkscreen / version marking updated to "Zero 3W V1.11".

V1.111 (2023-10)

• 1U1 (RF switch): an additional approved alternate component option was added to the BOM. Footprint and pinout unchanged.

V1.12 (2023-11)

Board configuration (board-ID) strap resistors corrected:

• R27: 51 kΩ → 100 kΩ
• R29: 51 kΩ → 20 kΩ
• R28: 10 kΩ → 18 kΩ
• R30: not populated (NC) → 36 kΩ
• R90728: not populated (NC) → 0 Ω

V1.12 (2023-12)

• Tolerance of R27 / R28 / R29 / R30 / R90728 updated to ±1 %.

What this means for your repair

• Per the official change records, the differences between V1.11 and V1.12 are limited to the items listed above. All other designators keep the same value and footprint across these revisions.
• In particular, the components you identified for repair (Q8, C320, C19, R67) were not changed between V1.11 and V1.12. Their placement and footprints are identical on both revisions, so the V1.11 placement diagram (radxa_zero_3w_v1110_smb.zip) and the V1.11 schematic can be used as the reference for a V1.12 board.
• For the exact value / rating of each component, please verify against the official BOM / schematic of your board revision before ordering.

Best regards,
Radxa Support

[RadxaMitchell]

Hi @tejasdukare02
This is my email address：machuang@radxa.com . Could you please send me an email? I’m unable to view the image you sent on GitHub.

[tejasdukare02]

HI Team, thank you for the Detailed Explaination, I have received the ZIP for Placement Diagram can you help me with BOM of board Revision V1.12. Regards, Tejas Dukare Raveagle Technologies Pvt,Ltd.

…

On Tue, 8 Sept 2026 at 08:25, Tang ZZ ***@***.***> wrote: Hi Tejas, Thank you for your patience. Based on our official board records, here is the board version change record for Radxa Zero 3W (RS107). We hope this helps you cross-check the hardware documents (schematic / placement / BOM) you have against your V1.12 board. Radxa Zero 3W (RS107) — Board Version Change Record Component supplier / part-number details are intentionally omitted; this record lists only the recorded differences between board revisions. V1.11 (2023-09) - R119: value changed from 100 Ω to 22 Ω (package 0201, footprint unchanged). - Board silkscreen / version marking updated to "Zero 3W V1.11". V1.111 (2023-10) - 1U1 (RF switch): an additional approved alternate component option was added to the BOM. Footprint and pinout unchanged. V1.12 (2023-11) Board configuration (board-ID) strap resistors corrected: - R27: 51 kΩ → 100 kΩ - R29: 51 kΩ → 20 kΩ - R28: 10 kΩ → 18 kΩ - R30: not populated (NC) → 36 kΩ - R90728: not populated (NC) → 0 Ω V1.12 (2023-12) - Tolerance of R27 / R28 / R29 / R30 / R90728 updated to ±1 %. What this means for your repair - Per the official change records, the differences between V1.11 and V1.12 are limited to the items listed above. All other designators keep the same value and footprint across these revisions. - In particular, the components you identified for repair (Q8, C320, C19, R67) were *not* changed between V1.11 and V1.12. Their placement and footprints are identical on both revisions, so the V1.11 placement diagram (radxa_zero_3w_v1110_smb.zip) and the V1.11 schematic can be used as the reference for a V1.12 board. - For the exact value / rating of each component, please verify against the official BOM / schematic of your board revision before ordering. Best regards, Radxa Support — Reply to this email directly, view it on GitHub <#2033?email_source=notifications&email_token=B7D4G732ZKLJ3U5YDAHJAN35N5YLNA5CNFSNUABIM5UWIORPF5TWS5BNNB2WEL2ENFZWG5LTONUW63SDN5WW2ZLOOQXTCOBTGQYDONZWUZZGKYLTN5XKO3LFNZ2GS33OUVSXMZLOOSWGM33PORSXEX3DNRUWG2Y#discussioncomment-18340776>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/B7D4G7ZZM6YJSE2LCACROCL5N5YLNAVCNFSNUABIKJSXA33TNF2G64TZHM3TONZQHA3DCOBUHNCGS43DOVZXG2LPNY5TCMBWGQ2TAMRUUF3AE> . Triage notifications, keep track of coding agent tasks and review pull requests on the go with GitHub Mobile for iOS <https://github.com/notifications/mobile/ios/B7D4G7Y54XUFK6DPYMKDHAD5N5YLNA5CNFSNUABIM5UWIORPF5TWS5BNNB2WEL2ENFZWG5LTONUW63SDN5WW2ZLOOQXTCOBTGQYDONZWUZZGKYLTN5XKO3LFNZ2GS33OUVSXMZLOOSVGM33PORSXEX3JN5ZQ> and Android <https://github.com/notifications/mobile/android/B7D4G756CFNV3Y4YKYZDK2L5N5YLNA5CNFSNUABIM5UWIORPF5TWS5BNNB2WEL2ENFZWG5LTONUW63SDN5WW2ZLOOQXTCOBTGQYDONZWUZZGKYLTN5XKO3LFNZ2GS33OUVSXMZLOOSXGM33PORSXEX3BNZSHE33JMQ>. Download it today! You are receiving this because you were mentioned.Message ID: ***@***.***>

[tzz-radxa]

Hi Tejas,

Thank you for confirming that you have received the placement diagram.

Regarding the full BOM for board revision V1.12: unfortunately we are unable to share it. The complete BOM is treated as internal documentation and is not distributed outside of Radxa, including component part numbers and supplier information.

For your repair work, please use the official schematic and the placement diagram as the reference. As noted in our previous reply, the components you identified (Q8, C320, C19, R67) were not changed between V1.11 and V1.12, so the V1.11 placement diagram and schematic can be used for cross-checking a V1.12 board. Exact component values and ratings should still be verified against the official schematic of your board revision.

If you need formal hardware documentation under a commercial agreement, please contact your Radxa sales representative or business channel.

Best regards,
Radxa Support