QLogic QLE2740 problem

[madxam44]

Hi,

I am using Esos master_3c936fa
I have problem with loading QLogic QLE2740. Card is not visible after loading ql2x00tgt driver
It is visible in lsipci

[root@localhost` firmware]# lspci | grep QLogic
8f:00.0 Fibre Channel: QLogic Corp. ISP2722-based 16/32Gb Fibre Channel to PCIe Adapter (rev 01)

Any1 can help ?

[msmith626]

You may need to use a different QLogic target driver. See "./configure --help" for the target driver options when building ESOS from source.

…

On Thu, Mar 21, 2024 at 8:45 AM madmax ***@***.***> wrote: Hi, I am using Esos master_3c936fa I have problem with loading QLogic QLE2740. Card is not visible after loading ql2x00tgt driver It is visible in lsipci ***@***.***` firmware]# lspci | grep QLogic 8f:00.0 Fibre Channel: QLogic Corp. ISP2722-based 16/32Gb Fibre Channel to PCIe Adapter (rev 01) Any1 can help ? — Reply to this email directly, view it on GitHub <#301>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABMQXXVYA3LRHEACCF6JECTYZLI7VAVCNFSM6AAAAABFBMGE6KVHI2DSMVQWIX3LMV43ASLTON2WKOZSGIYDAMJQGIYTSNA> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[madxam44]

Thanks for suggestion. After ./configure with --enable-qla32 card is working properly in ESOS.
After some tests I can say that 4k randread IOPS performance is much worst with qla32 drivers on QLogic QLE2740 32GB FC than on old drivers and QLogic QLE2660 16gb FC