You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
{{ message }}
Repository navigation
Commit 99469cb
Browse filesBrowse the repository at this point in the historyBrowse files
multimode: comparable versions, firmware check in the editor, hide unmeasurable voltages
- Build version is <PySwitch version>+mm<commit count>.<hash>[.local], so a
higher number is newer (local builds had git describe with upstream tags,
CI builds only a hash).
- The editor compares the firmware files on the device with the latest build
and shows "up to date" or the number of differing files.
- VOLTAGE_MONITOR reads ~0 V on a USB powered Mini 6 (measured 0.016 V), so
the power text only shows voltages from 0.2 V on.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
"save.failed": {en: "Could not save: {e}. Check that the drive is still connected.",zh: "无法保存:{e}。请确认磁盘仍处于连接状态。",ja: "保存できませんでした:{e}。ドライブが接続されているか確認してください。",ko: "저장하지 못했어요: {e}. 드라이브가 연결돼 있는지 확인하세요."},
"fw.checking": {en: "Checking firmware {i}/{n}: {path}",zh: "正在检查固件 {i}/{n}:{path}",ja: "ファームウェアを確認中 {i}/{n}:{path}",ko: "펌웨어 확인 중 {i}/{n}: {path}"},
337
341
"fw.done": {en: "Firmware {v} installed: wrote {n} file(s), the others were up to date.",zh: "固件 {v} 已安装:写入了 {n} 个文件,其余已是最新。",ja: "ファームウェア {v} をインストールしました:{n} 個のファイルを書き込みました(残りは最新)。",ko: "펌웨어 {v} 설치 완료: 파일 {n}개를 새로 썼어요 (나머지는 이미 최신)."},
338
342
"fw.failed": {en: "The firmware installation stopped: {e}. Run it again to write the remaining files.",zh: "固件安装中断:{e}。再次运行将只写入剩余文件。",ja: "ファームウェアのインストールが途中で止まりました:{e}。もう一度実行すると残りのファイルだけを書き込みます。",ko: "펌웨어 설치가 중간에 멈췄어요: {e}. 다시 실행하면 남은 파일만 씁니다."},
0 commit comments