Historical record. The dates, candidate identity, "current" claims, next steps and permissions below belong to this recorded boundary. See current state for the latest physically observed result.
Storage03 was manually flashed but failed internal-root discovery and USB startup. Its latest owner photograph shows rescue alive, no partition rows and USB recovery -19 before any write. Storage04 is its uniquely versioned successor, not another diagnostic firmware. The same platform serves normal, rescue and diagnostic userspace. Physical acceptance is still required; no assistant flashed hardware.
Executing the locked Linux 6.18 block/partitions/msdos.c against the retained
factory MBR/EBR1/EBR2 exposes p5=166912/1679360 and p7=2104320/1638400 sectors.
The sentinel extended lengths do not require a compatibility parser. Primary
partitions also parse normally; the oversized legacy FAT is clipped by the block
core. The fixture test also rejects missing signatures and invalid boot flags.
No physical MBR/EBR readback from this failed boot exists. Factory parsing success
does not prove that the current card returns those bytes. Do not invent a new
partition map or claim this identifies the device's precise failure.
Storage03's SBC parameter was already an invalid-companion predicate, despite
its confusing name. Its code still depended on host->card, which Linux assigns
only at the end of mmc_init_card(), after EXT_CSD reading and possible user-area
reselection. It could reject that ordinary initialization step. The new adapter
tracks OCR addressing and EXT_CSD hardware region directly from successful
controller responses. A partition switch becomes trusted only after CMD13
confirms completion without switch/status errors. Reset invalidates that context.
Whole requests validate direction, sector range, SBC flags/count and stop command;
standard reads, writes, cache flush, power notification and sleep commands share
one path. These are source-backed corrections, not proof that this exact step
caused the photographed failure. Table reads now log only sector/count/signature,
with DMA ownership synchronized; no identity/calibration contents are logged.
USB previously lived in the diagnostic board endpoint and accepted only narrow
loader register snapshots. The physical result proves that preflight refused;
the omitted register values prevent identifying its exact failed predicate.
The production platform driver now normalizes its owned digital PHY controls
using the retained MT6582 usb_phy_recover sequence, masks MAC interrupts and
disconnects inherited device SOFTCONN before reinitialization. Inherited forced
peripheral inputs and dormant DMA configuration are no longer refusal reasons.
Active DMA or host mode still refuses takeover. Chip, mapped resources, rail and
clock validity are checked; analog trims, PLLs, chargers and VBUS supplies are not
rewritten. The fixed peripheral board forces device inputs through the same
session code on first attachment and reconnect. Cable-present and late attachment
use the same driver, with read-only sysfs status and cached legacy ABI.
Sources: locked Linux drivers/mmc/{host/mtk-sd.c,core/mmc.c,core/block.c} and
block/partitions/{msdos.c,core.c}; retained factory metadata and scatter in the
partition audit; MT6582 donor
donorSource/drivers/phy/mediatek/phy-mtk-u2-mt6582.c and retained stock
usb_phy_recover disassembly referenced by
Storage03's source review. Existing GPL notices remain.
| Previous mechanism | Classification | Active treatment |
|---|---|---|
| CONFIG_Y2_BOOT_DIAGNOSTIC platform selection | Hardware support under a misleading development name | CONFIG_Y2_PLATFORM; same selected drivers in every build |
| y2_read_only / y2_production MMC modes | Obsolete bring-up split | One internal MMC path, typed request protection |
| Read-only/production diagnostic DT identities | Obsolete mode selection | One innioasis-y2.dts; compatibility filenames include it |
| Shared clocks, pinctrl, PWRAP, display/audio/input support | Permanent hardware support, qualification still bounded | Retained; no repeat bring-up or sibling SoC substitution |
| Protected eMMC ranges and PMIC control ownership | Permanent safety policy | Retained and made operation/context aware |
| Diagnostic read initiating USB | Obsolete ownership | Platform probe initializes hardware; status reads observe it |
| Unplugged boot / exact saved-state USB predicate | Obsolete bring-up behavior | Owned digital state normalization and normal attachment polling |
| Observer loading the display module | Obsolete diagnostic dependency | Production platform startup loads it asynchronously on CPU1 |
| Cached status and kernel logs | Useful instrumentation | Read-only platform sysfs plus y2-status and optional observer |
| SD-root builder/resolver | Historical recovery implementation | Old builder entrypoint forwards to production; history remains in Git |
| Early watchdog stop, inherited PLL rates/rails, one-bit MMC | Partial platform support | Same implementation in all builds; full power/watchdog/PM and throughput remain qualification work |
No new charger/power-entry behavior is implemented. USB presence does not prove charging; battery voltage and the cause of intermittent off-state response remain unknown. USB reconnect and SD hotplug retain physical qualification gaps.
No partition changes. ANDROID/Y2ROOT is physical EMMC_USER 0x05180000, 0x33400000 bytes; USRDATA/Y2DATA is 0x40380000,0x32000000 bytes. Normal writes may reach only those two spans. Reads include stock metadata/protected user-area partitions. Hardware boot/RPMB access, persistent boot configuration, erase, sanitize, lock/write-protect, vendor commands and BOOTIMG writes are excluded. CMD23 supports ordinary reads/writes, reliable-write and metadata-tag flags; packed writes are not supported. Discard is not a supported operation; mounts omit discard. No table is rewritten and no fixed-offset loop-device fallback exists.
BOOTIMG owns the kernel, DT, rescue and its matching loadable DRM module. Rescue stages the module in /run/y2/modules and binds that RAM tree at /lib/modules in Buildroot. Kernel-only updates therefore no longer require replacing a duplicated module in Y2ROOT. The permanent platform contract is y2-platform-v1; future compatibility checks still reject kernels/userspace that violate its ABI. This candidate needs new BOOTIMG and Y2ROOT for startup/status tools and the module ownership transition. Y2DATA schema and the existing template bytes are unchanged; select the preserve-data scatter. Normal updates never initialize USRDATA.
Rescue discovers both internal filesystems using host identity, geometry and ext4
label/UUID; validates markers; checks and mounts them; then switches root. It
never depends on SD. Failure is visible, retains the process and ACM logging
where USB is functioning, and does not format or reboot-loop. y2.rescue=1 is an
explicit boot-command-line rescue entry for future recovery integration. OTA,
signatures, remote downloads and Y2PlayerNative are not implemented.