Skip to content

Latest commit

 

History

History
36 lines (27 loc) · 4.29 KB

stock-system-baseline.md

File metadata and controls

36 lines (27 loc) · 4.29 KB

Current non-root system baseline

Historical record. The dates, candidate identity, "current" claims, next steps and permissions below belong to this recorded boundary. See current state for the latest physically observed result.

Date: 2026-09-08. Task: Y2E-105. Capture: 20260908-stock. One authorized USB target was selected explicitly for all remote commands; its serial and full properties remain private. No device state was intentionally changed.

Method and status

Host ADB: 1.0.41, platform-tools 37.0.1-15733141, /opt/android-sdk/platform-tools/adb. Initial sandbox USB/ADB access was denied; the host-side permission retry succeeded. This is distinct from device-side access denial. Commands were captured separately with a 15-second host timeout. The first status-marker attempt failed because the device lacks printf; its diagnostic output was retained. The compatible form was <read command>; y2_rc=$?; echo __Y2_REMOTE_EXIT__=$y2_rc. Both host status and remote marker are retained. Device clock is recorded separately; host UTC anchors the session.

Evidence Result Scope
id CONFIRMED uid 2000 shell, SELinux context u:r:init_shell:s0 Non-root only; no privilege changes attempted.
/proc/version CONFIRMED Linux 3.4.67, GCC 4.7, SMP PREEMPT, build timestamp June 1 2026 Version string alone does not exclude a patched kernel.
/proc/cpuinfo CONFIRMED MT6582, Cortex-A7 part 0xc07, ARMv7, NEON/VFPv4 Revision string 0000 is not a physical PCB-revision identification.
Selected properties Android 4.4.2/API 19, model/board/device Y2, ro.hardware=mt6582 Current runtime evidence supersedes assumptions about hardware property resolution.
Build identity Y2/Y2/Y2:4.4.2/KOT49H/1786599642:user/test-keys, display Y2-v1.0.0 Device is not certified stock. Exact installed boot/system image hashes and installation lineage remain UNKNOWN.
Security/USB properties secure=1, debuggable=0, adb.secure=1; mass_storage,adb Consistent with secure non-root ADB; does not uniquely identify an image.
/proc/meminfo, interrupts, iomem, CPU topology COLLECTED Evidence available for later memory/IRQ analysis; do not treat an incomplete reservation map as boot-ready.
/proc/modules EMPTY successful observation No loadable modules listed at capture; built-ins remain possible.
/proc/cmdline, dmesg DENIED, remote 1 while ADB host 0 No root/su workaround.
uname -a UNAVAILABLE, remote 127 while ADB host 0 Use the separately captured proc version.
config.gz and exported DT paths UNAVAILABLE, remote 1 No exported tree/config; embedded config/DT remains an offline question.
Module/firmware directory metadata PARTIAL; aggregate remote 1 /system paths list entries while /vendor/lib/modules and /vendor/firmware are absent. Do not discard the successful portion.
dumpsys battery COLLECTED but internally conflicting Repeated status/present/level fields disagree (100/50 and true/false). Do not infer battery health or adequate recovery power from this service alone.

Firmware names include WIFI_RAM_CODE_MT6582, other Wi-Fi variants, WMT_SOC.cfg, MT6572/82 patch blobs and an mt6627 directory. /system/lib/modules/wlan.ko points to wlan_consys_mt6582.ko; the listing alone does not establish that the target exists or is loaded. No firmware was executed and no radio state was toggled.

Mount evidence shows read-only /system, writable /data, /cache, /protect_f and /protect_s, plus mounted internal and removable-card media. USB composition does not prove storage is safely quiesced for a raw snapshot. Protect/calibration candidates are mutable mounted filesystems at this point.

Review decision

The access baseline is complete, including denials and missing exports. The target is a non-root stock-family Android system; exact installed provenance remains unknown. This is sufficient for Y2E-110 to read partition metadata only. It is insufficient for raw partition acquisition, any recovery write or Linux boot. Battery service inconsistency is recorded as a separate observation for later passive power investigation.