Repository navigation
[Device] Hardware test results: ATK A9 Ultra, ATK F1 Ultimate 2.0, Attack Shark R6 / X6, MCHOSE L7 Ultra+ #1502
PrimeBuild-pc
started this conversation in
Device Support Request
Replies: 0 comments
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Uh oh!
There was an error while loading. Please reload this page.
Device type
Mouse (5 devices, all owned and tested by me)
Device model
ATK A9 Ultra, ATK F1 Ultimate 2.0, Attack Shark R6, Attack Shark X6, MCHOSE L7 Ultra+
vendorId:productId
Connection type
2.4 GHz wireless receiver (all runs below). I can repeat any of them wired if useful.
What happens today?
Hardware test results (build BETA v2.0.28f, Windows 11, Chrome), one run per device:
receiverOnlineis null). Listed as "Test Needed".Diagnostics
Attack Shark R6 — full log
{"device": {"present": true, "brand": "Attack Shark", "name": "Attack Shark R6", "vendorId": 14142, "productId": 34, "productName": "Attack Shark R6", "transport": "webhid", "connectionType": "Wireless", "pollingRateHz": 2000, "supportedPollingRates": [125, 250, 500, 1000, 2000, 4000, 8000], "dpi": 1600, "dpiStages": null, "activeDpiStage": null, "batteryPercent": 49, "batteryState": "Discharging", "firmware": ["Mouse 0.7", "Dongle 0.7"], "liftOffDistance": "Low", "driverFamily": "attack-shark", "deviceMode": null, "collectionsSummary": "interfaces 0x000C:0x0001, 0xFFA0:0x0001, 0xFFFF:0x0001, 0xFFFF:0x0000", "signalStrength": null, "receiverOnline": null, "receiverRfId": null, "pairingInProgress": false}, "results": [{"key": "connection", "label": "Device connected", "status": "pass", "detail": "Connected through WebHID"}, {"key": "interface", "label": "Control interface", "status": "pass", "detail": "interfaces 0x000C:0x0001, 0xFFA0:0x0001, 0xFFFF:0x0001, 0xFFFF:0x0000"}, {"key": "identity", "label": "Device identity", "status": "pass", "detail": "Attack Shark Attack Shark R6"}, {"key": "driver", "label": "Driver identification", "status": "pass", "detail": "Attack Shark attack-shark"}, {"key": "dpi", "label": "DPI read-back", "status": "pass", "detail": "1,600 DPI"}, {"key": "pollingRead", "label": "Polling rate read-back", "status": "pass", "detail": "2000 Hz"}, {"key": "battery", "label": "Battery read-back", "status": "pass", "detail": "49%"}, {"key": "firmware", "label": "Firmware read-back", "status": "pass", "detail": "Mouse 0.7, Dongle 0.7"}, {"key": "liftOff", "label": "Lift-off read-back", "status": "pass", "detail": "Low"}, {"key": "link", "label": "Wireless link (receiver)", "status": "pass", "detail": "driver read the wireless connection over the RF link"}, {"key": "flashRead", "label": "Flash / EEPROM read-back", "status": "pass", "detail": "decoded fields are in range (dpi, polling, lift-off, battery)"}, {"key": "brandWirelessBattery", "label": "Attack Shark wireless battery", "status": "pass", "detail": "49%"}, {"key": "sampling", "label": "Polling rate sampling", "status": "skip", "detail": "avg 152 Hz vs reported 2000 Hz — dropout or rate mismatch detected, so the sample is not counted as a failure."}, {"key": "flashWrite", "label": "Flash write round-trip", "status": "pass", "detail": "wrote 800 DPI → read back → restored 1,600 DPI · wrote 4,000 Hz → read back → restored 2,000 Hz · wrote Medium → read back → restored Low"}], "verdict": "pass", "durationMs": 14515.299999999814, "runAt": "2026-11-15T14:20:54.150Z", "build": "BETA · v2.0.28f", "supportedPage": {"listed": true, "status": "likely", "label": "Test Needed", "matchedBy": "pid", "pageModel": "R6", "detail": "listed as Test Needed on the supported-devices page — this passing verification supports moving it to Supported."}}ATK F1 Ultimate 2.0 — full log
{"device": {"present": true, "brand": "ATK", "name": "ATK F1 Ultimate 2.0", "vendorId": 14139, "productId": 4569, "productName": "ATK F1 Ultimate 2.0", "transport": "webhid", "connectionType": "Wireless", "pollingRateHz": 2000, "supportedPollingRates": [125, 250, 500, 1000, 2000, 4000, 8000], "dpi": 1600, "dpiStages": [1600], "activeDpiStage": 0, "batteryPercent": 100, "batteryState": "Discharging", "firmware": ["Mouse 3.03"], "liftOffDistance": "Low", "driverFamily": "atk", "deviceMode": null, "collectionsSummary": "interfaces 0xFF05:0x0000, 0xFF03:0x0000, 0x000C:0x0001, 0xFF02:0x0002, 0xFF04:0x0002, 0xFF06:0x0002", "signalStrength": null, "receiverOnline": null, "receiverRfId": null, "pairingInProgress": false}, "results": [{"key": "connection", "label": "Device connected", "status": "pass", "detail": "Connected through WebHID"}, {"key": "interface", "label": "Control interface", "status": "pass", "detail": "interfaces 0xFF05:0x0000, 0xFF03:0x0000, 0x000C:0x0001, 0xFF02:0x0002, 0xFF04:0x0002, 0xFF06:0x0002"}, {"key": "identity", "label": "Device identity", "status": "pass", "detail": "ATK ATK F1 Ultimate 2.0"}, {"key": "driver", "label": "Driver identification", "status": "pass", "detail": "ATK atk"}, {"key": "dpi", "label": "DPI read-back", "status": "pass", "detail": "1,600 DPI"}, {"key": "pollingRead", "label": "Polling rate read-back", "status": "pass", "detail": "2000 Hz"}, {"key": "battery", "label": "Battery read-back", "status": "pass", "detail": "100%"}, {"key": "firmware", "label": "Firmware read-back", "status": "pass", "detail": "Mouse 3.03"}, {"key": "liftOff", "label": "Lift-off read-back", "status": "pass", "detail": "Low"}, {"key": "dpiStages", "label": "DPI stages read-back", "status": "pass", "detail": "1,600 DPI"}, {"key": "link", "label": "Wireless link (receiver)", "status": "pass", "detail": "driver read the wireless connection over the RF link"}, {"key": "flashRead", "label": "Flash / EEPROM read-back", "status": "pass", "detail": "decoded fields are in range (dpi, polling, lift-off, battery, dpi stages)"}, {"key": "brandReceiverTelemetry", "label": "ATK receiver telemetry", "status": "fail", "detail": "wireless connection without receiver online/RF telemetry — the receiver link was not confirmed."}, {"key": "brandWirelessBattery", "label": "ATK wireless battery", "status": "pass", "detail": "100%"}, {"key": "sampling", "label": "Polling rate sampling", "status": "skip", "detail": "avg 222 Hz vs reported 2000 Hz — dropout or rate mismatch detected, so the sample is not counted as a failure."}, {"key": "flashWrite", "label": "Flash write round-trip", "status": "pass", "detail": "wrote 800 DPI → read back → restored 1,600 DPI · wrote 4,000 Hz → read back → restored 2,000 Hz · wrote Medium → read back → restored Low"}], "verdict": "fail", "durationMs": 14588.200000000186, "runAt": "2026-11-15T14:19:55.800Z", "build": "BETA · v2.0.28f", "supportedPage": {"listed": true, "status": "likely", "label": "Test Needed", "matchedBy": "name", "pageModel": "F1 Ultimate 2.0", "detail": "listed as Test Needed on the supported-devices page — this run did not pass, keep the status as-is."}}ATK A9 Ultra — full log
{"device": {"present": true, "brand": "ATK", "name": "ATK Wireless mouse 8k dongle-L", "vendorId": 14139, "productId": 4569, "productName": "ATK Wireless mouse 8k dongle-L", "transport": "webhid", "connectionType": "Wireless", "pollingRateHz": 4000, "supportedPollingRates": [125, 250, 500, 1000, 2000, 4000, 8000], "dpi": 1600, "dpiStages": [1600], "activeDpiStage": 0, "batteryPercent": 95, "batteryState": "Discharging", "firmware": ["Mouse 3.03"], "liftOffDistance": "Medium", "driverFamily": "atk", "deviceMode": null, "collectionsSummary": "interfaces 0xFF05:0x0000, 0xFF03:0x0000, 0x000C:0x0001, 0xFF02:0x0002, 0xFF04:0x0002, 0xFF06:0x0002", "signalStrength": null, "receiverOnline": null, "receiverRfId": null, "pairingInProgress": false}, "results": [{"key": "connection", "label": "Device connected", "status": "pass", "detail": "Connected through WebHID"}, {"key": "interface", "label": "Control interface", "status": "pass", "detail": "interfaces 0xFF05:0x0000, 0xFF03:0x0000, 0x000C:0x0001, 0xFF02:0x0002, 0xFF04:0x0002, 0xFF06:0x0002"}, {"key": "identity", "label": "Device identity", "status": "pass", "detail": "ATK ATK Wireless mouse 8k dongle-L"}, {"key": "driver", "label": "Driver identification", "status": "pass", "detail": "ATK atk"}, {"key": "dpi", "label": "DPI read-back", "status": "pass", "detail": "1,600 DPI"}, {"key": "pollingRead", "label": "Polling rate read-back", "status": "pass", "detail": "4000 Hz"}, {"key": "battery", "label": "Battery read-back", "status": "pass", "detail": "95%"}, {"key": "firmware", "label": "Firmware read-back", "status": "pass", "detail": "Mouse 3.03"}, {"key": "liftOff", "label": "Lift-off read-back", "status": "pass", "detail": "Medium"}, {"key": "dpiStages", "label": "DPI stages read-back", "status": "pass", "detail": "1,600 DPI"}, {"key": "link", "label": "Wireless link (receiver)", "status": "pass", "detail": "driver read the wireless connection over the RF link"}, {"key": "flashRead", "label": "Flash / EEPROM read-back", "status": "pass", "detail": "decoded fields are in range (dpi, polling, lift-off, battery, dpi stages)"}, {"key": "brandReceiverTelemetry", "label": "ATK receiver telemetry", "status": "fail", "detail": "wireless connection without receiver online/RF telemetry — the receiver link was not confirmed."}, {"key": "brandWirelessBattery", "label": "ATK wireless battery", "status": "pass", "detail": "95%"}, {"key": "sampling", "label": "Polling rate sampling", "status": "skip", "detail": "avg 676 Hz vs reported 4000 Hz — dropout or rate mismatch detected, so the sample is not counted as a failure."}, {"key": "flashWrite", "label": "Flash write round-trip", "status": "pass", "detail": "wrote 800 DPI → read back → restored 1,600 DPI · wrote 8,000 Hz → read back → restored 4,000 Hz · wrote Low → read back → restored Medium"}], "verdict": "fail", "durationMs": 14612.099999999627, "runAt": "2026-11-15T14:19:04.095Z", "build": "BETA · v2.0.28f", "supportedPage": {"listed": false, "status": null, "label": null, "matchedBy": null, "pageModel": null, "detail": "not listed on the supported-devices page"}}MCHOSE L7 Ultra+ — full log
{"device": {"present": true, "brand": "MCHOSE", "name": "MCHOSE L7 Ultra+", "vendorId": 21075, "productId": 4128, "productName": "MCHOSE L7 Ultra+", "transport": "webhid", "connectionType": "Wireless", "pollingRateHz": 0, "supportedPollingRates": null, "dpi": 1600, "dpiStages": [400, 800, 1600, 3200, 6400, 42000], "activeDpiStage": 2, "batteryPercent": 56, "batteryState": "Discharging", "firmware": ["Receiver 5.34.5.0"], "liftOffDistance": "Medium", "driverFamily": "mchose", "deviceMode": null, "collectionsSummary": "interfaces 0xFF0B:0x0104, 0xFF01:0x0001, 0x000C:0x0001", "signalStrength": null, "receiverOnline": null, "receiverRfId": null, "pairingInProgress": false}, "results": [{"key": "connection", "label": "Device connected", "status": "pass", "detail": "Connected through WebHID"}, {"key": "interface", "label": "Control interface", "status": "pass", "detail": "interfaces 0xFF0B:0x0104, 0xFF01:0x0001, 0x000C:0x0001"}, {"key": "identity", "label": "Device identity", "status": "pass", "detail": "MCHOSE MCHOSE L7 Ultra+"}, {"key": "driver", "label": "Driver identification", "status": "pass", "detail": "MCHOSE mchose"}, {"key": "dpi", "label": "DPI read-back", "status": "pass", "detail": "1,600 DPI"}, {"key": "pollingRead", "label": "Polling rate read-back", "status": "fail", "detail": "The polling rate was not read from the device."}, {"key": "battery", "label": "Battery read-back", "status": "pass", "detail": "56%"}, {"key": "firmware", "label": "Firmware read-back", "status": "pass", "detail": "Receiver 5.34.5.0"}, {"key": "liftOff", "label": "Lift-off read-back", "status": "pass", "detail": "Medium"}, {"key": "dpiStages", "label": "DPI stages read-back", "status": "pass", "detail": "400, 800, 1,600, 3,200, 6,400, 42,000 DPI"}, {"key": "link", "label": "Wireless link (receiver)", "status": "pass", "detail": "driver read the wireless connection over the RF link"}, {"key": "flashRead", "label": "Flash / EEPROM read-back", "status": "fail", "detail": "a decoded flash field is missing or out of range."}, {"key": "brandWirelessBattery", "label": "MCHOSE wireless battery", "status": "pass", "detail": "56%"}, {"key": "sampling", "label": "Polling rate sampling", "status": "pass", "detail": "avg 115 Hz · peak 2000 Hz · stability 87% · 589 samples"}, {"key": "flashWrite", "label": "Flash write round-trip", "status": "fail", "detail": "Poll rate: restore to 0 Hz failed after reading back 125 Hz — device settings may have changed."}], "verdict": "fail", "durationMs": 19389.799999999814, "runAt": "2026-11-15T14:22:07.854Z", "build": "BETA · v2.0.28f", "supportedPage": {"listed": true, "status": "unknown", "label": "Unknown", "matchedBy": "name", "pageModel": "L7 Ultra+", "detail": "listed as Unknown on the supported-devices page — this run did not pass, keep the status as-is."}}Attack Shark X6 — full log
{"device": {"present": true, "brand": "Attack Shark", "name": "Attack Shark mouse (2.4 GHz receiver)", "vendorId": 7511, "productId": 64096, "productName": "Attack Shark mouse (2.4 GHz receiver)", "transport": "webhid", "connectionType": "Wireless", "pollingRateHz": null, "supportedPollingRates": [], "dpi": null, "dpiStages": null, "activeDpiStage": null, "batteryPercent": null, "batteryState": "Unknown", "firmware": null, "liftOffDistance": null, "driverFamily": "attackshark", "deviceMode": null, "collectionsSummary": "interfaces 0x000C:0x0001", "signalStrength": null, "receiverOnline": null, "receiverRfId": null, "pairingInProgress": false}, "results": [{"key": "connection", "label": "Device connected", "status": "pass", "detail": "Connected through WebHID"}, {"key": "interface", "label": "Control interface", "status": "pass", "detail": "interfaces 0x000C:0x0001"}, {"key": "identity", "label": "Device identity", "status": "pass", "detail": "Attack Shark Attack Shark mouse (2.4 GHz receiver)"}, {"key": "driver", "label": "Driver identification", "status": "pass", "detail": "Attack Shark attackshark"}, {"key": "dpi", "label": "DPI read-back", "status": "fail", "detail": "The sensor DPI was not read from the device."}, {"key": "pollingRead", "label": "Polling rate read-back", "status": "fail", "detail": "The polling rate was not read from the device."}, {"key": "battery", "label": "Battery read-back", "status": "skip", "detail": "Not reported by this device."}, {"key": "firmware", "label": "Firmware read-back", "status": "skip", "detail": "Not reported by this device."}, {"key": "liftOff", "label": "Lift-off read-back", "status": "skip", "detail": "Not reported by this device."}, {"key": "link", "label": "Wireless link (receiver)", "status": "pass", "detail": "driver read the wireless connection over the RF link"}, {"key": "flashRead", "label": "Flash / EEPROM read-back", "status": "fail", "detail": "a decoded flash field is missing or out of range."}, {"key": "brandWirelessBattery", "label": "Attack Shark wireless battery", "status": "fail", "detail": "this brand reports battery on the wireless link — none was read."}, {"key": "sampling", "label": "Polling rate sampling", "status": "skip", "detail": "avg 96 Hz vs reported 1000 Hz — dropout or rate mismatch detected, so the sample is not counted as a failure."}, {"key": "flashWrite", "label": "Flash write round-trip", "status": "skip", "detail": "you have staged, unapplied changes — apply or revert them first."}], "verdict": "fail", "durationMs": 12282.799999999814, "runAt": "2026-11-15T14:23:31.390Z", "build": "BETA · v2.0.28f", "supportedPage": {"listed": true, "status": "bridge", "label": "Needs Bridge", "matchedBy": "pid", "pageModel": "X11", "detail": "listed as Needs Bridge on the supported-devices page — this run did not pass, keep the status as-is."}}Can you help test?
Yes, I have all five devices and can run more tests (wired mode, specific settings, Bridge builds).
Anything else?
A Pulsar Xlite V3 eS (onboard-only model with the settings screen on the bottom) does not appear in the browser picker at all; I added that to the existing Pulsar Xlite V3 thread (#1030) instead of here.
All reactions