diff --git a/README.md b/README.md
index d2379828f..c131217ba 100644
--- a/README.md
+++ b/README.md
@@ -40,6 +40,7 @@ iFlytek XFP301-M         T31ZX        JXQ03     RTL8188FU_USB    NOR_16    resea
 Imilab EC3 CMSXJ25A      SSC325       GC2053    MT7603UN_?       NOR_16M   in progress
 Dahua IPC-HFW1230SP-V2   SSC335DE     GC2053                     NOR_16M   done
 Imou IPC-C22E-S2-v2      SSC335DE     GC2053    RTL8188FU_USB    NOR_16M   done
+Imou IPC-C22EN (Cue 2)   HI3516EV200  SC2235    RTL8188FU_USB    NOR_8M    in progress
 Imou IPC-C22EP-S2        SSC325DE     SC2239    RTL8188FU_USB    NAND      testing stage 1
 Imou IPC-C22EP-S2 ?      SSC325DE     SC2335    RTL8188FU_USB    NAND      wait sensor driver
 Imou IPC-С22СP           SSC325       SC2239    RTL8188FU_USB    NOR_8M    in progress
diff --git a/devices/hi3516ev200_lite_imou-cue2-c22en/br-ext-chip-hisilicon/configs/hi3516ev200_lite_imou-cue2-c22en_defconfig b/devices/hi3516ev200_lite_imou-cue2-c22en/br-ext-chip-hisilicon/configs/hi3516ev200_lite_imou-cue2-c22en_defconfig
new file mode 100644
index 000000000..6d189a3db
--- /dev/null
+++ b/devices/hi3516ev200_lite_imou-cue2-c22en/br-ext-chip-hisilicon/configs/hi3516ev200_lite_imou-cue2-c22en_defconfig
@@ -0,0 +1,67 @@
+# Architecture
+BR2_arm=y
+BR2_cortex_a7=y
+BR2_ARM_EABI=y
+BR2_ARM_FPU_NEON_VFPV4=y
+BR2_ARM_INSTRUCTIONS_THUMB2=y
+
+# Toolchain
+BR2_TOOLCHAIN_EXTERNAL=y
+BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
+BR2_TOOLCHAIN_EXTERNAL_URL="https://github.com/openipc/firmware/releases/download/$(OPENIPC_TOOLCHAIN).tgz"
+BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX="arm-openipc-linux-musleabi"
+BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_9=y
+BR2_TOOLCHAIN_EXTERNAL_CUSTOM_MUSL=y
+BR2_TOOLCHAIN_EXTERNAL_CXX=y
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/openipc/linux/archive/$(OPENIPC_KERNEL).tar.gz"
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(EXTERNAL_VENDOR)/board/$(OPENIPC_SOC_FAMILY)/hi3516ev200.generic.config"
+BR2_LINUX_KERNEL_UIMAGE=y
+BR2_LINUX_KERNEL_XZ=y
+
+# Filesystem
+BR2_PACKAGE_BUSYBOX_CONFIG="$(BR2_EXTERNAL)/package/busybox/busybox.config"
+BR2_PACKAGE_UBOOT_TOOLS=y
+BR2_PACKAGE_ZLIB=y
+# BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
+# BR2_PACKAGE_WIREGUARD_LINUX_COMPAT is not set
+# BR2_PACKAGE_WIREGUARD_TOOLS is not set
+BR2_TARGET_ROOTFS_CPIO=y
+BR2_TARGET_ROOTFS_SQUASHFS=y
+BR2_TARGET_ROOTFS_SQUASHFS4_XZ=y
+
+# OpenIPC
+BR2_OPENIPC_SOC_VENDOR="hisilicon"
+BR2_OPENIPC_SOC_MODEL="hi3516ev200"
+BR2_OPENIPC_SOC_FAMILY="hi3516ev200"
+BR2_OPENIPC_VARIANT="lite"
+BR2_OPENIPC_FLASH_SIZE="8"
+
+# Packages
+BR2_PACKAGE_DROPBEAR_OPENIPC=y
+BR2_PACKAGE_HISILICON_OPENSDK=y
+BR2_PACKAGE_HISILICON_OSDRV_HI3516EV200=y
+BR2_PACKAGE_IPCTOOL=y
+BR2_PACKAGE_LIBCURL_OPENIPC=y
+BR2_PACKAGE_LIBCURL_OPENIPC_CURL=y
+# BR2_PACKAGE_LIBCURL_OPENIPC_PROXY_SUPPORT is not set
+# BR2_PACKAGE_LIBCURL_OPENIPC_COOKIES_SUPPORT is not set
+# BR2_PACKAGE_LIBCURL_OPENIPC_EXTRA_PROTOCOLS_FEATURES is not set
+BR2_PACKAGE_LIBEVENT_OPENIPC=y
+BR2_PACKAGE_LIBOGG_OPENIPC=y
+BR2_PACKAGE_MAJESTIC_FONTS=y
+BR2_PACKAGE_MAJESTIC_WEBUI=y
+BR2_PACKAGE_MAJESTIC=y
+BR2_PACKAGE_MBEDTLS_OPENIPC=y
+BR2_PACKAGE_OPUS_OPENIPC=y
+BR2_PACKAGE_OPUS_OPENIPC_FIXED_POINT=y
+BR2_PACKAGE_RTL8188FU_OPENIPC=y
+# BR2_PACKAGE_VTUND_OPENIPC is not set
+BR2_PACKAGE_WPA_SUPPLICANT=y
+BR2_PACKAGE_WPA_SUPPLICANT_CLI=y
+BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE=y
+BR2_PACKAGE_YAML_CLI=y
diff --git a/devices/hi3516ev200_lite_imou-cue2-c22en/general/overlay/etc/init.d/S01leds b/devices/hi3516ev200_lite_imou-cue2-c22en/general/overlay/etc/init.d/S01leds
new file mode 100755
index 000000000..275a03a7a
--- /dev/null
+++ b/devices/hi3516ev200_lite_imou-cue2-c22en/general/overlay/etc/init.d/S01leds
@@ -0,0 +1,16 @@
+#!/bin/sh
+#
+# Early-boot LED state: red on while booting, like the stock firmware.
+# Top LED is bi-colour, both halves active low: GPIO 0 = green, GPIO 9 = red.
+# Bottom LED: GPIO 4 = red, active high; kept off.
+# The shutdown state is set by S99leds, which rcK stops first.
+
+case "$1" in
+	start | "")
+		gpio set 0; gpio clear 9; gpio clear 4
+		;;
+	stop)
+		;;
+esac
+
+exit 0
diff --git a/devices/hi3516ev200_lite_imou-cue2-c22en/general/overlay/etc/init.d/S99leds b/devices/hi3516ev200_lite_imou-cue2-c22en/general/overlay/etc/init.d/S99leds
new file mode 100755
index 000000000..256a72ff2
--- /dev/null
+++ b/devices/hi3516ev200_lite_imou-cue2-c22en/general/overlay/etc/init.d/S99leds
@@ -0,0 +1,20 @@
+#!/bin/sh
+#
+# Late-boot LED state: green on, or all off when led_disabled=1.
+# Top LED is bi-colour, both halves active low: GPIO 0 = green, GPIO 9 = red.
+# Bottom LED: GPIO 4 = red, active high; kept off.
+
+case "$1" in
+	start | "")
+		if [ "$(fw_printenv -n led_disabled 2>/dev/null)" = "1" ]; then
+			gpio set 0; gpio set 9; gpio clear 4
+		else
+			gpio clear 0; gpio set 9; gpio clear 4
+		fi
+		;;
+	stop)
+		gpio set 0; gpio set 9; gpio clear 4
+		;;
+esac
+
+exit 0
diff --git a/devices/hi3516ev200_lite_imou-cue2-c22en/general/overlay/etc/rc.local b/devices/hi3516ev200_lite_imou-cue2-c22en/general/overlay/etc/rc.local
new file mode 100755
index 000000000..358fad257
--- /dev/null
+++ b/devices/hi3516ev200_lite_imou-cue2-c22en/general/overlay/etc/rc.local
@@ -0,0 +1,17 @@
+#!/bin/sh
+#
+# IR illuminator: the LED driver needs a PWM signal on GPIO4_7 (pin 39),
+# not a static level. Not in muxes.sh: S30customizer runs that before
+# S70vendor loads open_sys_config and open_pwm, which set the pinmux and
+# PWM block up again.
+(
+	sleep 8
+	devmem 0x120101BC 32 $(( $(devmem 0x120101BC 32) | 0x80 ))
+	devmem 0x100C0010 32 0x1001
+	devmem 0x12080020 32 0x3e8
+	devmem 0x12080024 32 0x3b0
+	devmem 0x12080028 32 0xa
+	devmem 0x1208002c 32 0x5
+) &
+
+exit 0
diff --git a/devices/hi3516ev200_lite_imou-cue2-c22en/general/overlay/etc/wireless/usb b/devices/hi3516ev200_lite_imou-cue2-c22en/general/overlay/etc/wireless/usb
new file mode 100755
index 000000000..4ead053e0
--- /dev/null
+++ b/devices/hi3516ev200_lite_imou-cue2-c22en/general/overlay/etc/wireless/usb
@@ -0,0 +1,15 @@
+#!/bin/sh
+
+set_gpio() {
+	[ "$2" -eq 1 ] && gpio set $1 || gpio clear $1
+	sleep 1
+}
+
+# RTL8188FTV on the USB bus, powered from GPIO 52 (high = on)
+if [ "$1" = "rtl8188fu-hi3516ev200-imou-cue2" ]; then
+	set_gpio 52 1
+	modprobe 8188fu
+	exit 0
+fi
+
+exit 1
diff --git a/devices/hi3516ev200_lite_imou-cue2-c22en/general/overlay/usr/share/openipc/customizer.sh b/devices/hi3516ev200_lite_imou-cue2-c22en/general/overlay/usr/share/openipc/customizer.sh
new file mode 100755
index 000000000..ac8331278
--- /dev/null
+++ b/devices/hi3516ev200_lite_imou-cue2-c22en/general/overlay/usr/share/openipc/customizer.sh
@@ -0,0 +1,54 @@
+#!/bin/sh
+#
+# Perform basic settings on a known IP camera
+#
+#
+# Set SoC and sensor. The SC2235 is wired to the DVP pads, which
+# load_hisilicon only routes when sensor_dvp=1.
+#
+fw_setenv soc hi3516ev200
+fw_setenv sensor sc2235
+fw_setenv sensor_dvp 1
+#
+# Set custom upgrade url
+#
+fw_setenv upgrade 'https://github.com/OpenIPC/builder/releases/download/latest/hi3516ev200_lite_imou-cue2-c22en-nor.tgz'
+#
+# Set custom majestic settings
+#
+cli -s .isp.sensorConfig /etc/sensors/sc2235_i2c_dc_1080p.ini
+cli -s .isp.iqProfile /etc/sensors/iq/sc2235.ini
+cli -s .isp.slowShutter low
+# The sensor is mounted upside down
+cli -s .image.mirror true
+cli -s .image.flip true
+cli -s .video0.codec h264
+cli -s .video0.fps 20
+cli -s .video1.enabled true
+cli -s .video1.size 640x360
+cli -s .video1.fps 10
+cli -s .nightMode.enabled true
+cli -s .nightMode.colorToGray true
+cli -s .nightMode.irCutPin1 55
+cli -s .nightMode.irCutSingleInvert true
+cli -s .nightMode.backlightPin 39
+# No light sensor wired: switch on the ISP's exposure (software sensor)
+cli -s .nightMode.lightMonitor true
+cli -s .nightMode.monitorDelay 20
+cli -s .nightMode.maxThreshold 12000
+cli -s .nightMode.minThreshold 4000
+cli -s .nightMode.overrideDrc 120
+cli -s .audio.enabled true
+cli -s .audio.codec opus
+cli -s .audio.srate 8000
+cli -s .audio.volume 30
+cli -s .audio.outputEnabled true
+cli -s .audio.outputVolume 80
+cli -s .audio.speakerPin 53
+cli -s .rtsp.backchannel true
+#
+# Set wlan device
+#
+fw_setenv wlandev rtl8188fu-hi3516ev200-imou-cue2
+
+exit 0
diff --git a/devices/hi3516ev200_lite_imou-cue2-c22en/general/overlay/usr/share/openipc/gpio.conf b/devices/hi3516ev200_lite_imou-cue2-c22en/general/overlay/usr/share/openipc/gpio.conf
new file mode 100644
index 000000000..41d1f44fa
--- /dev/null
+++ b/devices/hi3516ev200_lite_imou-cue2-c22en/general/overlay/usr/share/openipc/gpio.conf
@@ -0,0 +1,13 @@
+alarm_in=-1
+alarm_out=-1
+button=56
+ircut1=55
+ircut2=-1
+led1=0
+led2=9
+light_ir=39
+light_wl=-1
+light_sensor=-1
+mmc_pwr=-1
+speaker=53
+usb=52
diff --git a/devices/hi3516ev200_lite_imou-cue2-c22en/general/scripts/excludes/hi3516ev200_lite.list b/devices/hi3516ev200_lite_imou-cue2-c22en/general/scripts/excludes/hi3516ev200_lite.list
new file mode 100644
index 000000000..542a19a08
--- /dev/null
+++ b/devices/hi3516ev200_lite_imou-cue2-c22en/general/scripts/excludes/hi3516ev200_lite.list
@@ -0,0 +1,88 @@
+# Imou Cue 2: keep the SC2235 DVP path (libsns_sc2235.so, sc2235_i2c_dc_1080p.ini, iq/sc2235.ini).
+# Keep iq/default.ini and its imx307.ini target.
+# WiFi is the vendor 8188fu driver (cfg80211 only): drop mac80211 and the
+# USB serial/net/gadget modules, the same set other 8 MB boards exclude.
+/etc/sensors/5M_imx335.ini
+/etc/sensors/camhi_imx307_i2c_4l_1080p.ini
+/etc/sensors/gc2053_i2c_1080p.ini
+/etc/sensors/gc4653_i2c_4M.ini
+/etc/sensors/high-fps/imx307_1280x720_60fps.ini
+/etc/sensors/high-fps/imx307_1920x1080_60fps.ini
+/etc/sensors/high-fps/imx307_368x304_200fps.ini
+/etc/sensors/high-fps/imx307_640x480_130fps.ini
+/etc/sensors/high-fps/imx335_1280x720_120fps.ini
+/etc/sensors/high-fps/imx335_1296x972_64fps.ini
+/etc/sensors/high-fps/imx335_1920x1080_55fps.ini
+/etc/sensors/high-fps/imx335_2592x1944_45fps.ini
+/etc/sensors/high-fps/imx335_800x480_240fps.ini
+/etc/sensors/imx307_i2c_2l_1080p.ini
+/etc/sensors/imx335_i2c_4M.ini
+/etc/sensors/iq/f23.ini
+/etc/sensors/iq/imx335.ini
+/etc/sensors/jxf22_i2c_1080p.ini
+/etc/sensors/jxf23_i2c_1080p.ini
+/etc/sensors/jxf37_i2c_1080p.ini
+/etc/sensors/sc2231_i2c_1080p.ini
+/etc/sensors/sc2232h_i2c_1080p.ini
+/etc/sensors/sc2239_i2c_1080p.ini
+/etc/sensors/sc2315e_i2c_1080p.ini
+/etc/sensors/sc3235_i2c_3M.ini
+/etc/sensors/sc3335_i2c_3M.ini
+/etc/sensors/sc4236_i2c_3M.ini
+/etc/sensors/sp2305_i2c_1080p.ini
+/etc/sensors/sp2308_i2c_1080p.ini
+/etc/sensors/WDR/5M_imx335.ini
+/etc/sensors/WDR/imx335_i2c_4M.ini
+/lib/modules/4.9.37/hisilicon/camhi-motor.ko
+/lib/modules/4.9.37/kernel/drivers/i2c/busses/i2c-tiny-usb.ko
+/lib/modules/4.9.37/kernel/drivers/net/usb/cdc_ether.ko
+/lib/modules/4.9.37/kernel/drivers/net/usb/rndis_host.ko
+/lib/modules/4.9.37/kernel/drivers/net/usb/usbnet.ko
+/lib/modules/4.9.37/kernel/drivers/net/wireless/mediatek/mt7601u/mt7601u.ko
+/lib/modules/4.9.37/kernel/drivers/usb/gadget/function/u_ether.ko
+/lib/modules/4.9.37/kernel/drivers/usb/gadget/function/usb_f_acm.ko
+/lib/modules/4.9.37/kernel/drivers/usb/gadget/function/usb_f_ecm.ko
+/lib/modules/4.9.37/kernel/drivers/usb/gadget/function/usb_f_mass_storage.ko
+/lib/modules/4.9.37/kernel/drivers/usb/gadget/function/usb_f_rndis.ko
+/lib/modules/4.9.37/kernel/drivers/usb/gadget/function/u_serial.ko
+/lib/modules/4.9.37/kernel/drivers/usb/gadget/libcomposite.ko
+/lib/modules/4.9.37/kernel/drivers/usb/serial/option.ko
+/lib/modules/4.9.37/kernel/drivers/usb/serial/usbserial.ko
+/lib/modules/4.9.37/kernel/drivers/usb/serial/usb-serial-simple.ko
+/lib/modules/4.9.37/kernel/drivers/usb/serial/usb_wwan.ko
+/lib/modules/4.9.37/kernel/fs/configfs/configfs.ko
+/lib/modules/4.9.37/kernel/net/mac80211/mac80211.ko
+/usr/bin/ircut_demo
+/usr/lib/sensors/libsns_ar0237.so
+/usr/lib/sensors/libsns_bt656.so
+/usr/lib/sensors/libsns_f22.so
+/usr/lib/sensors/libsns_f23.so
+/usr/lib/sensors/libsns_f37.so
+/usr/lib/sensors/libsns_gc2053_forcar.so
+/usr/lib/sensors/libsns_gc2053.so
+/usr/lib/sensors/libsns_gc4023.so
+/usr/lib/sensors/libsns_gc4653_2l.so
+/usr/lib/sensors/libsns_gc5603.so
+/usr/lib/sensors/libsns_imx290.so
+/usr/lib/sensors/libsns_imx307_2l.so
+/usr/lib/sensors/libsns_imx307.so
+/usr/lib/sensors/libsns_imx327_2l.so
+/usr/lib/sensors/libsns_imx327.so
+/usr/lib/sensors/libsns_imx335_2l.so
+/usr/lib/sensors/libsns_imx335.so
+/usr/lib/sensors/libsns_mis2008.so
+/usr/lib/sensors/libsns_os02g10.so
+/usr/lib/sensors/libsns_os05a.so
+/usr/lib/sensors/libsns_ov2718.so
+/usr/lib/sensors/libsns_sc2231.so
+/usr/lib/sensors/libsns_sc2232h.so
+/usr/lib/sensors/libsns_sc2239.so
+/usr/lib/sensors/libsns_sc223a.so
+/usr/lib/sensors/libsns_sc2315e.so
+/usr/lib/sensors/libsns_sc3235.so
+/usr/lib/sensors/libsns_sc3335.so
+/usr/lib/sensors/libsns_sc3336.so
+/usr/lib/sensors/libsns_sc4236.so
+/usr/lib/sensors/libsns_sc500ai.so
+/usr/lib/sensors/libsns_sp2305.so
+/usr/lib/sensors/libsns_sp2308.so