(IMPORTANT:) Add context for Start and End buttons - context lost for either selecting start/end point on map, manual input values, or selected based on CCS project list (JB)
DONE: Add help documentation (added by michael )
DONE: Add BIL logo at bottom with disclaimer hyperlink to NETL disclaimer page (similar to CarbonMatchmaker (https://www.energy.gov/fecm/carbon-matchmaker)) (JB)
DONE: Add DiscCO2ver and BIL logo to disclaimer page (JB)
DONE: Add BIL funding text (@sleveckis to request latest version from @schooleyc ) (JB)
DONE: Add DisCO2ver logo to upper right corner, left of menu button/collapsible list (JB)
DONE: Limit users only selecting lat/lon within land boundaries of AK or contiguous US (can provide spatial layers if this helps); add error handling for this (JB)
DONE: Add dynamic scale bar in lower right side of map
NOT POSSIBLE: Add north arrow to upper right hand corner
DONE: Add spacing on left/right of input areas (divs?)
DONE: Change term "Source Latitude & Longitude" to "Add Start Location" (do similar for destination)
DONE: Put WGS84 reference next to Latitude and Longitude, ex. Latitude (in World Geodetic System WGS 1984(WGS 84)): and Longitude (in WGS 84)
DONE: Add known project locations from alpha version into Select an optional start location box
DONE: Change text in "Select an optional start location" to "Select known CCS project as start location" - do similar for destination
DONE: Make sure all references to source location are changed to start location (so we have start and destination)
NOT POSSIBLE: Enable in-map location selection, as users move mouse over map show changing lat/lon and grey out if they go outside bounds (not over contiguous US or AK, again I can provide layer if this helps)
DONE: Add DOE, NETL, and BIL logos
DONE: Add disclaimer and other required text
DONE: Change title to Smart CO2 Transport-Routing Tool
(IMPORTANT:) Add context for Start and End buttons - context lost for either selecting start/end point on map, manual input values, or selected based on CCS project list (JB)
DONE: Add help documentation (added by michael )
DONE: Add BIL logo at bottom with disclaimer hyperlink to NETL disclaimer page (similar to CarbonMatchmaker (https://www.energy.gov/fecm/carbon-matchmaker)) (JB)
DONE: Add DiscCO2ver and BIL logo to disclaimer page (JB)
DONE: Add BIL funding text (@sleveckis to request latest version from @schooleyc ) (JB)
DONE: Add DisCO2ver logo to upper right corner, left of menu button/collapsible list (JB)
DONE: Limit users only selecting lat/lon within land boundaries of AK or contiguous US (can provide spatial layers if this helps); add error handling for this (JB)
DONE: Add dynamic scale bar in lower right side of map
NOT POSSIBLE: Add north arrow to upper right hand corner
DONE: Add spacing on left/right of input areas (divs?)
DONE: Change term "Source Latitude & Longitude" to "Add Start Location" (do similar for destination)
DONE: Put WGS84 reference next to Latitude and Longitude, ex. Latitude (in World Geodetic System WGS 1984(WGS 84)): and Longitude (in WGS 84)
DONE: Add known project locations from alpha version into Select an optional start location box
DONE: Change text in "Select an optional start location" to "Select known CCS project as start location" - do similar for destination
DONE: Make sure all references to source location are changed to start location (so we have start and destination)
NOT POSSIBLE: Enable in-map location selection, as users move mouse over map show changing lat/lon and grey out if they go outside bounds (not over contiguous US or AK, again I can provide layer if this helps)
DONE: Add DOE, NETL, and BIL logos
DONE: Add disclaimer and other required text
DONE: Change title to Smart CO2 Transport-Routing Tool