Skip to content

Latest commit

 

History

History
373 lines (320 loc) · 28.9 KB

USER_GUIDE.md

File metadata and controls

373 lines (320 loc) · 28.9 KB

User guide


The idea

One voice, played like a classic 37-key American paraphonic analog monosynth (the original in these docs): two oscillators and a sub into a mixer, a 4-pole transistor ladder, two envelopes and two mod busses, with the panel's habits kept — push the mixer and the filter overdrives, turn the resonance up and the bass thins out, take it past 70% and the filter sings on its own. Where the original's manual says how its panel behaves, SubWerk does the same: the feedback loop, the resonance knob, Multidrive's character, the envelopes' attack and loop, the pink noise.

The screen

Seven tabs. Every tab has the status line at the top: VOICES 1 CPU 3% PEAK 4%. CPU is the plugin's share of one core over the last half second (100% would be rendering taking as long as the audio lasts), PEAK its slowest block in that time; VOICES is 0, 1 or 2 (Duo on two keys).

Tab What's on it
OSC Oscillator 1 (octave, wave, sub octave), oscillator 2 (octave, frequency, beat frequency, wave, hard sync), the mixer (osc 1, sub, osc 2, noise, feedback, noise colour, Analog, keyboard reset)
FILTER Cutoff, resonance, Multidrive, filter EG amount, key track, the filter EG's velocity and key tracking, slope; the filter EG (with loop, reset, latch, attack curve, sync)
AMP The amp EG (the same options); velocity, key tracking and volume
MOD Mod 1 and mod 2: source, rate mode (Free, Sync, Hi), sync rate, control, trigger; rate, pitch amount and where it goes, filter amount, the third destination and its amount, key tracking of the rate
BROWSE Preset categories and presets; favorite, a random preset, save, init
KEYS Mono / Duo, note priority, trigger; bend ranges and which oscillators bend; oscillator 2's keys (by priority, the highest, the lowest, or a drone); glide; the preset stepper, save, init, randomize
DEPTH For each bus: its control, and how much the mod wheel, velocity and pressure add to its depth

The pages, rendered offline from the skin (on the device MPC fills in the values and lights the chosen options):

OSC FILTER
AMP MOD
KEYS DEPTH

Every tab has a Q-Link set named after what it controls (OSC + MIX, FILTER, AMP, MOD 1+2, BROWSE, KEYS, DEPTH). MPC shows five tabs at a time: KEYS and DEPTH are on its next page. Stepped controls (octaves, slopes, modes, the preset stepper) move exactly one step per Q-Link detent or data-wheel click.

The sound engine

Oscillators

  • Octave: 32', 16', 8', 4', 2' (8' plays the key's pitch).

  • Wave: a continuous sweep from triangle (0) through saw, square, down to a 6% pulse. In between the shapes cross-fade; past square the pulse narrows. The value shows the shape: Saw, Saw-Sqr 40%, Pulse 23%.

  • Osc 2 Freq: ±7 semitones against oscillator 1, for beating, intervals, or sync sweeps.

  • Beat Freq: detunes oscillator 2 by up to ±3.5 Hz — Hz, not cents, so the two oscillators beat at the same rate on every note, as the original's BEAT FREQ does (detuning with Osc 2 Freq beats twice as fast an octave up). Keep Osc 2 Freq at 0 for an even beat across the keyboard.

  • Hard Sync: oscillator 2 restarts its cycle with oscillator 1's; move osc 2's frequency (by hand, or with a bus) for the tearing sync sound. Osc 1 can be silent in the mixer and still lead.

  • Sub Octave: the sub oscillator is a square one or two octaves under oscillator 1.

  • KB Reset: On, every note that starts the envelopes starts the oscillators at the beginning of their cycle too (the same punch every time); Off, they run free, as analog oscillators do.

  • Analog (was Drift): how far from an ideal, digital synth — at 0 every oscillator is perfect and every note the same; turned up, it behaves like an analog unit, all of it scaled by the knob (the figures here are at full):

    • Drift: each oscillator's pitch wanders slowly (±6 cents) and a little faster (±1.2 cents, tenths of a second), the cutoff too; each note starts a little off (±3 cents).
    • Jitter: each cycle is a little longer or shorter than the last (±0.06%): two oscillators in unison never lock, they breathe.
    • Shapes: the saw's ramp bows slightly, the square isn't quite 50% (a trace of even harmonics, as a real comparator gives), edges and the triangle's tips are a little soft (the oscillators' bandwidth, from 40 kHz down to about 20 kHz), and the oscillators are AC coupled into the mixer (a square's top sags at bass notes).
    • Per note: every note a slightly different wave shape, cutoff (±0.3 semitones) and resonance.
    • The unit: every SubWerk instance is a slightly different instrument — its own tuning error per oscillator (±1.5 cents), square width, cutoff, resonance and envelope times (±3%). A project keeps its instances' units; a new instance is a new unit; presets don't change it.

    None of it is measured from a real unit (there isn't one here): it is modelled on how analog oscillators work and kept small. Presets mostly sit between 15% and 50%.

All oscillators are band-limited (polyBLEP) and run at twice the sample rate.

Mixer

Osc 1, Sub, Osc 2, Noise and Feedback levels. The knobs have an audio taper (Feedback a steeper one). Several sources up high drive the filter harder — on purpose. Feedback takes the mixer's own output back into the mixer, as the original's FEEDBACK knob does with nothing in EXT IN: up to about 90% it thickens and pushes the filter harder, past that the loop runs over unity and gets gritty, and the top is the chaos of an overdriven loop (about +6 dB louder at full: turn the volume down). With resonance it howls. Noise Colour goes from white (0) through pink (the middle, the original's noise, the default) to dark (1), at the same loudness.

Filter

A 4-pole transistor ladder, modelled with its nonlinearities.

  • Cutoff 20 Hz–20 kHz. Resonance: past 70% the filter oscillates by itself, a sine at the cutoff, as on the original, where "settings above 7" self-oscillate. Play it with Key Track at 100%: it tracks the keyboard, a little flat at the top of the resonance, like the circuit. Resonance also thins the bass, as on the original: about 13 dB just under the edge.
  • Multidrive: drives the ladder and a second stage after it, as the original's OTA and FET stages between the filter and the VCA: asymmetric, tube-like warmth (even harmonics) in the middle of its range, toward hard clipping at full, where it is as gritty as recordings of the original (0.0.7). Louder too, but by a few dB, not a jump.
  • Slope: 6, 12, 18 or 24 dB per octave (the outputs of the ladder's four stages).
  • EG Amount: the filter EG's sweep, up to ±10 octaves (the value shows octaves).
  • Key Track: 0–200%; 100% makes the cutoff follow the keyboard exactly, around C3 as MPC numbers it (MIDI 60; the original pivots on MIDI 48, which it also calls C3: the knob's sound is the same, an octave apart).
  • FEG Velocity: how much velocity scales the filter EG (and so the sweep).
  • FEG Key Track: higher notes, shorter filter EG times.

Envelopes

Both are DAHDSR: Delay, Attack, Hold, Decay, Sustain, Release (every stage up to 10 s; attack, decay and release from 1 ms, delay and hold from 0). As on the original, the attack is linear by default; decay and release fall exponentially (the times are to −60 dB).

  • Loop: while the key is held the envelope cycles delay → attack → hold → decay → release and round again, the release stage included, as on the original. With Sustain at 0 that is a plain D-A-H-D cycle; with Sustain up, decay falls to it and release takes it the rest of the way.
  • Reset: a new note's attack starts from 0. Off, it starts from wherever the envelope is (smooth legato, the analog way).
  • Attack: Linear, or Exp (the original's EXP ATTACK): an analog RC charge, steep at first and rounding off into the top (63% of the way at half the attack time), still at the top on time. Snappier on short attacks, a swell that blooms early on long ones.
  • Latch: once a note has started it, the envelope stays as if the key were held — at its sustain, or looping — after the key is up (the original's LATCH ON). Latch the amp EG for a drone that keeps sounding; switch Latch off, stop MPC's transport or send all notes off (CC 123) to let it release. A latched amp EG keeps the voice running (and its share of the CPU) even at a sustain of 0: turn the sustain up and the sound comes back, as on the original.
  • Sync: while the key is held (or the envelope latched) it restarts every note value of MPC's tempo, 8 bars to 1/32T — on the bar's grid while MPC plays, counted from the note while it is stopped. With the amp EG's sustain low: a trance gate (Pad / Trance Gate); on the filter EG: rhythmic plucks out of one held note.
  • Velocity and Key Track as above; the amp EG's are on the AMP tab.

Keys, glide and Duo

  • Mode: Mono, or Duo: oscillator 1 plays one key and oscillator 2 another, through the one filter and VCA (paraphonic). With one key down, both play it.
  • Priority: which key sounds when several are down — Last, Low or High. Releasing a key returns to the next one by the same rule. In Duo, oscillator 1 takes the first by priority, oscillator 2 the second.
  • Osc 2 Keys (the original's KB CTRL): Priority as above; in Duo, High puts oscillator 2 on the highest key held and oscillator 1 on the lowest, Low the other way round. Drone (Mono or Duo): oscillator 2 follows no key — C3 at 8', its Freq knob reaching ±3 octaves instead of ±7 semitones — under whatever oscillator 1 plays (Lead / Drone Lead). The amp EG still gates it: latch the amp EG for a drone that never stops.
  • Trigger: Multi restarts the envelopes on every key struck, a sounding key struck again too (held by the pedal, or repeated); releasing a key hands the oscillators back to one still held without a new attack. Single only when the gate was closed (legato phrases play on one envelope).
  • Glide: Off, Always, or Legato (only between overlapping keys); Gated and Legato Gated are those two gated, the original's GATED: the glide moves only while a key (or the sustain pedal) holds the gate, and stops where it is when you let go. With Gated the next note glides on from there; with Legato Gated a detached next note starts at its own pitch. Type: Rate (the time per octave: big leaps take longer), Time (every glide takes the same time), Exp (exponential, fast then slow, like an RC). Osc: which oscillators glide.
  • Bend Up / Down: the pitch bend range, 0–24 semitones each way. Bend To: which oscillators the bend moves — both, one (to bend one against the other), or Off: the pitch wheel then does only what a bus with Pitch Bend as its source makes of it (a wheel for the filter, the wave, osc 2 alone by an interval).
  • The sustain pedal keeps the last note sounding until it lifts. While it holds the gate open, the next key plays legato, as on the original: Single doesn't restart the envelopes and Legato glide glides.

The mod busses

Two identical busses. Each takes one source and sends it to three places at once:

Source LFO shapes: Triangle, Square, Saw (falling), Ramp (rising), S&H (a new random value each cycle), Smooth (gliding random), Sine, Noise (random, the rate its speed). Envelopes: Filter EG, Amp EG. Players: Velocity, Aftertouch, Key (the key against C3: +1 two octaves up, −1 two down), Constant (always 1: with Control, the wheel, velocity or pressure itself), Pitch Bend (the pitch wheel, −1..1)
Rate / Rate Mode / Sync Rate Free 0.05–100 Hz, Sync a note value of MPC's tempo (8 bars to 1/32T), or Hi 0.5–1000 Hz (the knob ×10; the value shows the real rate)
Key Track 0–200%: the rate follows the key, around C3 (100%: twice as fast an octave up); free and Hi rates
Trigger Free: runs on its own (a synced bus locks to the bar while MPC plays, unless the other bus is modulating its rate); Retrig: restarts at every new note
Pitch + Pitch To pitch amount (up to ±24 st, fine near 0) for osc 1+2, osc 1 or osc 2
Filter cutoff amount (up to ±5 octaves)
Destination + Amount one more target: Wave 1+2, Wave 1, Wave 2, Resonance, Multidrive, Sub, Noise, Feedback, Volume, Other Rate (the other bus's rate, ×1/16..×16), EG Amount, Key Track, Osc 1 Level, Osc 2 Level, Beat Freq, EG Time (both envelopes' times, ×1/8..×8: negative shorter, positive longer), FEG Time, AEG Time, Glide Time (each glide's time as it starts, ×1/8..×8)
Control what sets the depth: Always, the Mod Wheel, Aftertouch (channel pressure), Velocity, or None (only the amounts on DEPTH)

Hi is the original's HI RANGE: the bus runs up to 1 kHz, into the audio range, and is worked out for every sample on pitch (FM), the filter (filter FM: growl and grit), the waves and the volume (ring and amplitude modulation); its other destinations take it at the control rate. A Hi bus can't be synced. Without Key Track the rate stays put: one rate against different notes gives different, mostly inharmonic, sidebands — metallic on leads, growling on basses. With Key Track at 100% it follows the keys and the FM stays harmonic: at C3 the key is 261.6 Hz, so a rate of 26.2 (×10 = 261.6 Hz) modulates 1:1, 52.3 2:1 (Keys / Harmonic FM), 13.1 1:2.

DEPTH (a tab of its own) sets how much the mod wheel, velocity and pressure add to the bus's depth, each −100%..+100%, on top of its Control, as the original's MOD WHEEL / VELOCITY / AFTERTOUCH amounts. The depth stays within −100%..+100%: with Control at Always the bus is full already, so there the amounts only take it away (Wheel −100%: the wheel fades the bus out). With Control None, the amounts alone: Velocity +100% and Pressure +50% is a bus that hard notes and pressing bring in.

Mod 1 starts on the mod wheel, so its pitch amount gives vibrato under the wheel; mod 2 starts on Always.

Recipes: sync sweep — source Filter EG, pitch to Osc 2, Hard Sync on. Laser — Filter EG to pitch at a large amount. Wobble — a synced triangle on the filter, Retrig. PWM — a slow triangle to Wave 1 with the wave near square. Growl — a Hi sine at 4–8 (40–80 Hz) on the filter, resonance up, Control None and Velocity +100% (Bass / Velocity Growl). Ring — a Hi sine at 20–60 on Volume (Lead / Ring Lead: the wheel or pressure brings it in). Snappier hard notes — Velocity on EG Time at a negative amount. Wider with the key — Key on Pitch To Osc 2. Thick, even beating — Beat Freq at 0.5–2 Hz with both oscillators up (Bass / Beating Bass).

Presets

108 factory presets in seven categories (Templates, Bass, Lead, Keys, FX, Sequence, Pad), all level-matched (−16 LUFS on their demo phrase, peaks under −1 dBFS). Pick them on the BROWSE tab or step through them on KEYS.

  • SAVE writes User NNN.sfp to Presets/User/ in the plugin folder (/sdcard/Synths/Devko - VST - SubWerk/). There is no text entry on the device, so presets are numbered; a number is never used twice. Rename them on a computer; the name shows in the browser. Files added, renamed or deleted while MPC runs show up when you browse (or in a new instance).
  • INIT loads Init: one saw through a half-open filter.
  • RANDOM moves the sound toward a random one by Rand Amount: oscillators, mixer, filter and the envelopes' main stages. Volume, the keyboard, glide and the busses stay. Rand Amount itself is a setting of the page, not part of a sound: presets don't save or change it.
  • BROWSE: the first two categories are FAVORITES and RECENT. The heart toggle marks the loaded preset as a favorite. RND loads a random preset of the category shown (never the one loaded); it isn't RANDOM, which changes the sound.
  • Presets on the Force's internal drive: /media/AkaiForce/SubWerk Presets/ (any folders inside become categories, loose files go to "Unsorted"; a folder named like a factory category shows as " (files)").
  • A preset file is plain text (subwerk 1 and key=value lines of real values), the same as an MPC project stores.

Melodic techno

The original is all over melodic techno, Stephan Bodzin's above all: two of them in his studio, its successor on stage, "the backbone of his music and his live set" (DJ Mag) — basslines sequenced from the computer, leads played by hand, and constant rides of cutoff, resonance, drive and glide. These presets are built on what is documented about that way of playing (no artist's patch is copied, the names are SubWerk's own, and no artist endorses SubWerk):

Preset What it is Play it
Bass / Rolling Sixteen Saw and sub, a 160 ms filter snap, KB Reset: the driving 16th bassline 16ths from the sequencer, A1–D2; open FEG Decay through the build
Bass / Horizon Drift Two detuned saws, the sub, feedback and resonance holding a growl under a low cutoff Long legato roots, Bb0–F2; ride Cutoff and Resonance (FILTER Q-Links 1 and 2)
Bass / Fifth Engine Saw plus a saw a fifth up, sub, feedback: the one-finger power chord Legato, Bb0–C2; ride Osc 2 Freq between +7 and 0
Bass / Glide Smear Constant-rate glide (big leaps slide longer) on a singing bass Overlap keys to slide; ride Glide Time in the phrase
Bass / Grit Roller Multidrive and feedback; velocity drives it harder Play the velocity: soft is round, hard is torn
Sequence / Resonant Steps Resonance just under the edge, a bar-locked filter sweep The Force's arpeggiator or sequencer at 1/16, C2–C4
Sequence / Ladder Acid An acid line through the round 24 dB ladder, legato slides 16ths, overlap for slides, accents for the squelch
Lead / Afterglow Lead Two detuned saws, a little feedback, exp legato glide, wheel vibrato C4–C6, legato, into a long reverb
Lead / Resonant Cry Resonance at the edge, feedback and drive; aftertouch opens it Lean into the keys (pressure), wheel for vibrato
Lead / Swell Lead Opens over a second as it is held; single trigger Slow phrases, long notes
Pad / Slow Bloom Duo Duo: two keys, two oscillators, a slow bloom Hold two-note intervals
Pad / Tidal Loop A looping filter EG breathing every ~4 s Hold one note
FX / Riser Engine A 4-bar synced rise of pitch, cutoff and feedback Start it 4 bars before the drop

The other presets of this set are classic patches of the original: Foundation Bass, Sub Pressure, Offbeat Knock, Knuckle Pluck, Glass Arpeggio, Sync Arpeggio, Duo Intervals, Solo Brass, Breath Flute, Tearing Sync, Fuzz Square, Hollow Haze, Downlifter, Impact Boom, Feedback Howl, Data Burble, Loop Ticker.

Tips: 121–125 BPM; basslines live between about A0 and F2; ride Cutoff, Resonance, Multidrive and EG Amount on the FILTER Q-Link set (Q-Links 1–4); use MPC's delay and reverb on the track (SubWerk has no effects of its own, on purpose).

In the direction of KVNDRA

KVNDRA (Cologne) plays melodic house, techno and ambient live on the original's smaller sibling and describes his sound as melancholic arpeggios with warm analog leads; his breakdowns show drones under a huge reverb, slow arps, rising and pulsing leads, a fast filter wobble and patterns that never quite repeat. These presets go that way (his own presets are his; nothing is copied):

Preset What it is Play it
Bass / Deep House Bass Saw-square and sub, a short filter blip, round and dry 16ths or off-beats, C1–C2
Bass / Wah Bass A 1/16-triplet triangle on the filter, resonant: the "wawawa" Long notes; the wobble follows MPC's tempo
Bass / Dark Pulse Bass 16' and 8' saws, feedback and resonance, a 2-bar filter sweep Long notes under a pad
Lead / Warm Glow Lead Detuned saw and square-ish wave, low resonance, exp legato glide C4–C6, legato; wheel for vibrato
Lead / Rising Lead The filter opens over 1.4 s as you hold it; glide on every note Long notes, into delay
Lead / Pulsing Lead A 1/16 square pulses the filter and level Hold notes; it follows MPC's tempo
Keys / Melancholy Arp Triangle-saw blend, detuned, a slow random pitch wobble like tape MPC's arpeggiator at 1/8 or 1/16, into delay
Keys / Slow Analog Arp One saw, resonant pluck; the wheel brings a slow filter sway Slow arps (1/4, 1/8)
Sequence / Endless Steps Two slow movements at unrelated rates on cutoff and wave: no two bars alike A short sequence, left running
Pad / Desert Drone Saw and a fifth, sub, feedback, a 14 s filter breath, slow swell Hold one low note into a big reverb
Pad / Cinematic Swell Duo: two keys swell in over 2 s Hold two-note intervals into a big reverb

Most of his sound is in the effects: put a long reverb (or two) and a delay on the track in MPC.

The melodic set

34 sounds (0.0.8) drawn up from an analysis of several hundred melodic-techno presets made for a software analog: what their designers do per role (where the filter rests, how far the envelope sweeps, how short the envelopes are, where the grit comes from, which effects), measured, and turned into SubWerk's own sounds. Nothing is copied, and the names are SubWerk's.

What sets them apart from the classic patches: the filter rests dark (100–300 Hz) and the filter EG sweeps four to five and a half octaves; key tracking low; resonance low, the edge from noise, the feedback loop and audio-rate filter FM instead; short envelopes (plucks of half a second, leads that are plucks with a tail); layers in octaves (and an octave and a fifth) rather than only detuned; velocity on the amp and the filter EG; movement locked to MPC's tempo.

Preset What it is Play it
Bass / Night Drive Saw with a saw an octave up, the sub, a little pink noise and feedback; a dark +5 oct filter snap 16ths from the sequencer, A0–F2; ride FEG Decay through the build
Bass / Pressure Drop Square and sub with audio-rate filter FM that follows the keys: a growl under a low cutoff Off-beat 16ths; Cutoff up for the drop
Bass / Velvet Slide One saw and the sub, pluck envelopes, a 45 ms legato glide Overlap notes to slide; velocity opens it
Bass / Octave Fifth Drive Saw, a saw an octave and a fifth up, the sub, feedback: a wide bass from one finger Roots, legato; ride Osc 2 Level
Bass / Gated Pulse A narrow pulse, the amp dipping after each hit, a 1/8 filter wobble locked to MPC Long notes or quarter notes; it moves in time
Bass / Midnight Mover Saw-square and square, a 1-bar filter sweep; the wheel opens it 2.5 octaves Held roots under the track; push the wheel into the drop
Bass / Grit Engine Hard-synced osc 2 a fifth up, pink noise, feedback and Multidrive: the dirty one Short 16ths; Multidrive to taste
Bass / Deep Foundation A sub two octaves down, a soft saw and a quiet octave on top; little filter movement Long roots under another bass or a kick
Lead / Hook Pluck Saw and an octave above, a fast +5.5 oct pluck, a breath of noise; vibrato on the wheel Short hook phrases into a dotted 1/8 delay
Lead / Glide Horizon Two saws an octave apart, 17 cents wide, single trigger with legato glide C4–C6, legato; wheel for vibrato
Lead / Breath Line Triangle-saw with pink noise: an airy, velocity-shaped lead Slow melodies, soft velocities
Lead / FM Edge A saw with filter FM at the note's own frequency: a hollow, slightly metallic edge Single notes; harder velocity brightens it
Lead / Sync Tear Osc 2 hard-synced, its pitch swept by the filter EG: the classic tear, kept dark Short notes; FEG Decay sets the tear
Lead / Thin Top Line Both oscillators at 4', 12 dB slope, no sub: a thin line that sits above the bass High melodies, legato glide
Lead / Drift Unison Two saws 18 cents apart, Analog up: a wide, drifting lead Long notes into chorus and reverb
Lead / Afterhours Square and saw, a slow PWM shimmer, a long plucky decay Mid-register phrases, wheel vibrato
Keys / Core Pluck Two saws 18 cents apart, 12 dB, a 0.5 s pluck: the genre's basic pluck MPC's arpeggiator at 1/16 into delay and reverb
Keys / Glass Tick Saw, a square an octave up, a white-noise tick on the attack Arps and short chords of single notes
Keys / Evolving Pluck Saw-square pluck; a 1-bar filter sweep and a slow wave shimmer: no two notes alike A repeating arp, left running
Keys / Octave Sparkle Saw, an octave above and the sub below: a bright, wide pluck Arps an octave up
Keys / Bitten Stab Saw and square, 12 dB, Multidrive: a short, bitten stab Off-beat stabs
Keys / Minor Stab Osc 2 a minor third up and the sub: a minor chord from one key Off-beat stabs; every key a minor chord
Keys / String Machine Square, saw and sub with slow PWM: an old string-machine stab Chords of single notes, longer stabs
Sequence / Night Arp Saw with an octave above, a very short +5.3 oct filter blip The arpeggiator at 1/16, C3–C5
Sequence / Sync Sequence Hard sync a fourth up and filter FM: a bright, biting sequence 16ths, accents for bite
Sequence / Midnight Roller Square and sub, feedback, filter FM, a short snap: a rolling mid sequence 16ths around C2–C3
Sequence / Sixteenth Gate The filter EG restarts every 1/16 while a key is held: a sequence from one note Hold one note; it follows MPC's tempo
Sequence / Hypno Steps Random filter steps every 1/16: a sequence that never quite repeats Hold a note, or a slow line
Pad / Octave Bloom Duo: two saws bloom over 1.3 s and decay over 9 s Hold two-note intervals
Pad / Night Breath Saw and an octave above, a 2-bar filter breath Hold one note into a long reverb
Pad / Drone Atmosphere Latched; osc 2 drones on C3, pink noise and heavy feedback, a slow filter drift Play once: it holds; play another key to move osc 1
Pad / Swell Haze Duo: the tone opens slowly while the note is already there Hold intervals; long releases
Pad / Wide Saw Texture Two saws 20 cents apart, Analog up, a slow wave shimmer: the closest to a supersaw Hold notes into chorus and reverb
FX / Night Riser Saw and white noise; the filter climbs over 4 s, a 1/16 tremolo Hold through the 4 bars before a drop

The effects are half of these sounds (SubWerk has none of its own, on purpose: one effect rack per track is lighter on the Force than effects in every synth). EffectWerk 0.0.3 has a Melodic category made for them; MPC's own effects work too:

For EffectWerk The chain
Bass Melodic Bass A compressor; a short 1/8 delay and a small plate, both low (wet about 10%)
Leads Lead Delay Plate, Lead Throw Low cut ~150 Hz; a dotted 1/8 delay, feedback ~40%, repeats darkened (high cut ~4 kHz), wet ~20%; then a plate or hall, long, no pre-delay, wet 15–25% (Lead Throw: the echoes ducked under the playing, rising in the gaps)
Plucks, stabs Pluck Space, Stab Echo Low cut ~150 Hz; the delay first (dotted 1/8, or a 1/4 echo for stabs, feedback ~35–40%, wet 20–25%), then a hall or plate at only 10–20%
Arps, sequences Arp Dotted, Sequence Pump As plucks, more delay; Sequence Pump ducks every beat like a sidechain
Pads, drones Pad Wash, Drone Space Low cut ~120 Hz; a slow chorus or ensemble (wet ~70%), then a long reverb (wet ~35%, no pre-delay); an auto-pan over a bar
The riser Riser Wash A long ping-pong into a 10 s space

MIDI

Message Does
Note on / off play (velocity per the EG velocity settings)
Pitch bend ± the bend ranges, on the oscillators Bend To names; a bus's source (Pitch Bend)
CC 1 (mod wheel) a bus's depth: its Control (Mod Wheel), its Wheel amount (DEPTH)
Channel pressure a bus's depth: its Control (Aftertouch), its Pressure amount (DEPTH); a bus's source (Aftertouch)
Poly aftertouch the same, from the sounding key's own pressure (what MPC's pads send)
CC 64 sustain pedal (re-striking a held key retriggers in Multi)
Note on for a key already down restrikes it (Multi retriggers); one note-off then releases it: a key is either down or up, as on a keyboard
CC 120 / 121 / 123 all sound off / reset all controllers (bend, wheel, pressure, pedal) / all notes off (latched envelopes too)

SubWerk listens on every MIDI channel.