diff --git a/KNOWN-ISSUES.md b/KNOWN-ISSUES.md index 7b7c67f24..9f41c4aeb 100644 --- a/KNOWN-ISSUES.md +++ b/KNOWN-ISSUES.md @@ -19,13 +19,14 @@ limitations under the License. ## engine#823 — Bosgame BeyondMax board: the USB ports need the xHCI keep-awake rule -**Status: MITIGATED in 1bit OS — the ports work; the fix is a udev rule, not a driver.** On this board (AXB35-02) -every external port **works** once the xHCI controllers are kept out of D3cold. The owner's plug test on **BIOS 1.10** -(2026-11-14 22:09–22:23 ADT) exercised each one: +**Status: MITIGATED — the ports work; the fix is a udev rule, not a driver. Verified on a host with the rule, not yet on +a 1bit OS boot.** On this board (AXB35-02) every external port **works** once the xHCI controllers are kept out of +D3cold. The owner's plug test on **BIOS 1.10** (2026-11-14 22:09–22:23 ADT, on the Ubuntu host with the rule installed +in `/etc/udev/rules.d`) exercised each one: ``` front Type-C c7:00.3 5 Gbps rear Type-C c7:00.4 5 Gbps -rear USB-A c5:00.4 5 Gbps rear USB-A c7:00.0 port 4, USB 2 (a USB 2 port) +rear USB-A c5:00.4 5 Gbps rear USB-A c7:00.0 port 4, high-speed with a USB 2 stick (USB 3 not yet tried) ``` **Cause: D3cold autosuspend.** A port whose controller has been allowed to suspend does not come back on this board's @@ -38,12 +39,14 @@ a UCSI device are both **true**, and neither is the cause. The board indeed expo but that does not stop the ports working — the failure was power management, not a missing port description. The `ec_su_axb35` refcount-0 observation is likewise true and likewise not the mechanism. -**Not established:** **USB4 / Thunderbolt devices are untested** through these ports. The keep-awake rule covers the +**Not established:** a **1bit OS boot** with the rule loaded from the image has not been plug-tested yet, and +**USB4 / Thunderbolt devices are untested** through these ports. The keep-awake rule covers the xHCI controllers; a USB4 tunnel is a different path (the two `Strix Halo USB4 Host Router` functions) and nobody has put a TB device on it. -**One device stays USB 2:** the **Ugreen RTL9210** enclosure enumerates at USB 2 on the rear USB-A port (`c7:00.0` -port 4). That port is USB 2, and the enclosure/cable pair is the other half of it — it is not the controller. +**One device stays USB 2:** the **Ugreen RTL9210** enclosure enumerates at USB 2 (high-speed) on **every** port, +including `c5:00.4`, where a different drive reaches 5 Gbps. So the limit is the enclosure or its cable, not the board. +Only a USB 2 stick has been tried on `c7:00.0` port 4, so whether that port carries USB 3 is not established. **Affected:** every install on the Bosgame BeyondMax (AXB35-02) **without** the keep-awake rule. With the rule, all four ports above behave. Other Strix Halo boards are not known to be affected.